Abstract:Charging lithium cobalt oxide (LCO) cathodes to high voltage results in a significant increase in the battery's energy density, however, leads to its fast failure due to irreversible side reactions. The combination of fluorinated electrolytes solutions with a Li–Al–F surface coating effectively stabilizes both the cathode and the anode, hence enhancing the long‐term performance of 4.6 V LCO cells. The need for high power density cathodes for Li‐ion batteries can be fulfilled by application of a high charging voltage above 4.5 V. As lithium cobalt oxide (LCO) remains a dominant commercial cathode material, tremendous efforts are invested to increase its charging potential toward 4.6 V. Yet, the long‐term performance of high voltage LCO cathodes still remains poor. Here, an integrated approach combining the application of an aluminum fluoride coating and the use of electrolyte solutions comprising 1:1:8 mixtures of difluoroethylene:fluoroethylene carbonate:dimethyl carbonate and 1 m LiPF6 is reported. This results in superior behavior of LCO cathodes charged at 4.6 V with high initial capacity of 223 mAh g−1, excellent long‐term performance, and 78% capacity retention after 500 cycles. Impressive stability is also found at 450 °C with an initial capacity of 220 mAh g−1 and around 84% capacity retention after 100 cycles. Systematic post‐mortem analysis of LCO cathodes and Li anodes after prolonged cycling reveals two main degradation routes related to changes at the surface of the cathodes and formation of passivation layers on the anodes. This study demonstrates the importance of appropriate selection of electrolyte solutions and development of effective coatings for improved performance of high voltage LCO‐based Li batteries.

Tailoring Electrolyte Dehydrogenation with Trace Additives: Stabilizing the LiCoO2 Cathode Beyond 4.6 V

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Stabilizing High-Voltage LiCoO2 Cathode in Aqueous Electrolyte with Interphase-forming Additive

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V

Boosting High-Voltage Practical Lithium Metal Batteries with Tailored Additives

Tuning surface chemistry to reduce the step-like degradation of LiCoO<sub>2</sub> at 4.6 V

Additive Evolved Stabilized Dual Electrode-Electrolyte Interphases Propelling the High-Voltage Li||LiCoO 2 Batteries up to 4.7V

Non‐Sacrificial Additive Enables a Non‐Passivating Cathode Interface for 4.6 V Li||LiCoO2 Batteries

Constructing Solid Electrode-Electrolyte Interfaces in High-Voltage Li| LiCoO2 Batteries under Dual-Additive Electrolyte Synergistic Effect

Stabilizing LiCoO<sub>2</sub> at 4.6 V by regulating anti-oxidative solvents

Improved Stability of Single‐Crystal LiCoO2 Cathodes at 4.8 V through Solvation Structure Regulation

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Synergistic effect of fluorinated solvent and Mg2+ enabling 4.6 V LiCoO2 performances

Stabilizing LiCoO2 at 4.6 V by regulating anti-oxidative solvents

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Electrolyte regulating and interface engineering for high voltage LiCoO2 lithium metal batteries

Stable Cycling of Practical High-Voltage LiCoO 2 Pouch Cell Via Electrolyte Modification

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Phosphate-Rich Interface for a Highly Stable and Safe 4.6 V LiCoO2 Cathode

Operating Highly Stable LiCoO2 Cathodes up to 4.6 V by Using an Effective Integration of Surface Engineering and Electrolyte Solutions Selection