Abstract:Elevating the cutoff voltage over 4.65 V notably augments the energy density of LCO batteries, but concomitant irreversible internal structural deterioration and serious side reactions at interface accelerate the capacity decay. The application requirement of high-voltage LCO batteries is still challenging. Triphenylphosphine selenide (TPPSe) served as multi-functional additive is involved in the electrolyte to concurrently construct stabilized solid electrolyte interphase (SEI) and cathode/electrolyte interphase (CEI) films and enhance the durability of high-voltage LCO batteries, benefited from the distinctive Se=P group. The specific Se=P group in TPPSe could be oxided in priority at cathode side to form SeO x and phosphate to enhance the high-voltage stability of LCO, and reduced at anode side to form Li 2 Se and Li 3 P, the lithium (Li) metal anode is well protected. Only 0.2 wt% TPPSe is added into the baseline electrolyte, the discharge capacity of LCO batteries is improved from 44 mAh g -1 to 159 mAh g -1 after 500 cycles at 1 C rate in the voltage range of 3.0-4.65 V. The functioning mechanism is revealed by XPS, TOF-SIMS, STEM, AFM, DEMS, et. al., combining with theoretical calculation. Furthermore, 10 wt% FEC and 1 wt% HTCN are introduced in the TPPSe-containing electrolyte to powerfully heighten the high-voltage stability. As expected, the Li||LCO pouch cell realizes the capacity of 169 mAh g -1 after 100 cycles at ultrahigh cutoff voltage (4.7 V) with low N/P ratio (1.19). Such an effective electrolyte-based strategy provides promising insight into the exploitation of valuable and practical electrolyte additives and realization of high-voltage LCO-based batteries with superior cycling performance.

Stable Cycling of Practical High-Voltage LiCoO 2 Pouch Cell Via Electrolyte Modification

In situ constructing a stable interface film on high-voltage LiCoO2 cathode via a novel electrolyte additive

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

In-situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO2 Cathode at High-Voltage

<i>In</i><i>-situ</i> constructed protective bilayer enabling stable cycling of LiCoO<sub>2</sub> cathode at high-voltage

Additive Evolved Stabilized Dual Electrode-Electrolyte Interphases Propelling the High-Voltage Li||LiCoO 2 Batteries up to 4.7V

Additive Evolved Stabilized Dual Electrode-Electrolyte Interphases Propelling the High-Voltage Li||LiCoO2 Batteries Up to 4.7 V

Stabilizing LiCoO<sub>2</sub> at 4.6 V by regulating anti-oxidative solvents

B-/Si-containing electrolyte additive efficiently establish a stable interface for high-voltage LiCoO 2 cathode and its synergistic effect on LiCoO 2 /graphite pouch cells

Enhanced High-Voltage Cyclability of LiNi0.5Co0.2Mn0.3O2-based Pouch Cells Via Lithium Difluorophosphate Introducing As Electrolyte Additive

Stabilizing LiCoO2 at 4.6 V by regulating anti-oxidative solvents

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Stabilizing High-Voltage LiCoO2 Cathode in Aqueous Electrolyte with Interphase-forming Additive

Enhanced cycle stability of LiCoO2 at high voltage by mixed conductive Li7.5La3Zr1.5Co0.5O12 coating

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

Stabilizing the interphasial layer of Ni-rich cathode and graphite anode for lithium ion battery with multifunctional additive

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries