Abstract:The continuous degradation of carbonate electrolytes and the dissolution of transition metal cations due to parasitic reactions on the cathode-electrolyte interphase (CEI) block the practical application of LiNi0.5Mn1.5O4-based lithium-ion batteries (LNMO-based LIBs) at a high voltage. cis-1,2,3,6-Tetrahydrophthalic anhydride (CTA) has been used as a functional additive in a carbonate baseline electrolyte (BE) for constructing the CEI film to enhance the cyclic stability of LNMO-based LIBs. The LNMO/Li cell with CTA exhibits a preponderant capacity retention of 83.3% compared with those of propionic anhydride (PA) (46.5%) and BE (13.6%) after 500 cycles at the current density of 1 C from 3.5 to 4.9 V. Additionally, the LNMO/graphite full cell with CTA still has a higher capacity retention of 95.46% even after 300 cycles at 1 C. By characterizations, it is reasonably demonstrated that CTA was oxidated to participate in the construction of a CEI film. An unsaturated aromatic group was introduced into the composition of the CEI film along with CTA in the formation process of the CEI film, which further improved the antioxidative activity of the CEI film under the influence of field-effect. Specifically, the CEI film obtains appreciable stability because of its higher antioxidative activity under the influence of field-effect. The stabilized CEI can significantly suppress the parasitic reactions of electrolytes, decrease the consumption of active-Li+, and protect the LNMO cathode structure, thereby enhancing the cyclic compatibility of LNMO-based LIBs with the carbonate electrolytes from 3.5 to 4.9 V.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01979?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01979</a>.Figures of comparative electrostatic potential surface of additives, cyclic voltammograms, charge–discharge voltage curves, cycling performance, Nyquist plots, TEM images, XRD patterns, concentration of transition metal ions with various electrolytes in different cycles, EDS elemental mapping images, line scanning plot, and FTIR spectra and tables of electron density of atom of anhydride additives from the Gaussian calculation, performance of LNMO/Li cells, conductivity of different electrolytes, and parameter values of the LNMO in different electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01979/suppl_file/am1c01979_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Stabilizing the interphasial layer of Ni-rich cathode and graphite anode for lithium ion battery with multifunctional additive

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

A Multifunctional Additive Capable of Electrolyte Stabilization and Structure/Interphases Regulation of High‐Energy Li‐Ion Batteries

Protective electrode/electrolyte interphases for high energy lithium-ion batteries with p-toluenesulfonyl fluoride electrolyte additive

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Multifunctional Electrolyte Additive Stabilizes Electrode–Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

High-performance Li/LiNi0.8Co0.1Mn0.1O2 batteries enabled by optimizing carbonate-based electrolyte and electrode interphases via triallylamine additive

Multifunctional Self-Reconstructive Cathode/Electrolyte Interphase Layer for Cobalt-Free Li-rich Layered Oxide Cathode

Stabilized Cathode Interphase for Enhancing Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4 -Based Lithium-Ion Battery via cis -1,2,3,6-Tetrahydrophthalic Anhydride

Optimizing interphase structure to enhance electrochemical performance of high voltage LiNi0.5Mn1.5O4 cathode via anhydride additives

Stabilized High-Voltage Cathodes via an F-Rich and Si-Containing Electrolyte Additive

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Promotion of Li + desolvation and efficient cathode interphase formation by 4-aminobenzoic multifunctional electrolyte additive

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.

Stabilizing Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode by generating ion-conductive polymer coating layer with 1, 3-dioxolane introducing electrolyte for lithium-ion batteries

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Cooperative stabilization of bi-electrodes with robust interphases for high-voltage lithium-metal batteries

Improving the interfacial stability of Li1.2Mn0.54Ni0.13Co0.13O2 cathode and Li metal anode via dual electrolyte additives synergistic effect