Abstract:Ultrahigh-voltage lithium metal batteries based on a cobalt-free LiNi0.5Mn1.5O4 (LNMO) cathode (5 V-class, vs. Li+/Li) and lithium metal anode (-3.04 V vs. the standard hydrogen electrode) have attracted extensive attention in recent years as promising candidates for the next-generation high energy density and sustainable batteries owing to their high theoretical energy density of similar to 650 W h kg-1, elimination of toxic Co elements and intrinsic safety caused by the LNMO spinel structure compared with the unstable layered oxide LiNixCoyMnzO2. However, their development is critically limited by the incompatibility between state-of-the-art carbonate electrolytes and the two aggressive electrodes. Herein, we synthesized a new electrolyte additive, i.e. 2,2-difluoroethyl methyl sulfone (FS), which could enable ultrahigh-voltage lithium metal batteries to stably cycle in conventional carbonate electrolytes. On the cathode side, unlike conventional electrolyte additives, FS could be selectively adsorbed on the LNMO surface and form a special assembled FS "buffer" layer, which could efficiently exclude free carbonate molecules away from the cathode surface. Therefore, upon charging, the -CF2H group of FS is preferably anodically decomposed to form an inorganic-rich CEI, which efficiently suppresses the micro-fracture and transition metal dissolution of LNMO. On the anode side, FS could also be preferably cathodically decomposed, resulting in an inorganic-rich SEI for the stable cycling of the Li metal anode. Thus, carbonate electrolyte with the FS additive enables the unprecedented high performance of cobalt-free 5 V-class lithium metal batteries, i.e. a 40 mu m-Li/LNMO (loading = 7 mg cm-2) full cell with a high capacity retention of 84% over 600 cycles at 1C using commercial a carbonate-based low-concentration electrolyte. The full cell consisting of a high-loading cathode (20 mg cm-2) and an ultrathin Li anode (40 mu m) achieves a capacity retention of 99% after 100 cycles at 0.25C. Moreover, Li/LNMO pouch cells, which have not been reported before to the best of our knowledge, are assembled and can operate stably for over 150 cycles. We rationally designed a semi-fluorinated sulfone electrolyte additive, i.e. 2,2-difluoroethyl methyl sulfone (FS), which can meet the harsh demand for Li/LNMO 5V class lithium metal batteries.

Multifunctional Self-Reconstructive Cathode/Electrolyte Interphase Layer for Cobalt-Free Li-rich Layered Oxide Cathode

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Construction of Inorganic-Rich Cathode Electrolyte Interphase on Co-Free Cathodes.

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Enhancing the Reaction Kinetics and Stability of Co‐Free Li‐Rich Cathode Materials via a Multifunctional Strategy

In–situ Construction of LixFeyOz Coatings on Cobalt–free Lithium–rich Cathode Materials for Enhanced Structural Stability and Electrochemical Performance

Stabilizing the interphasial layer of Ni-rich cathode and graphite anode for lithium ion battery with multifunctional additive

High-voltage and high-safety nickel-rich layered cathode enabled by a self-reconstructive cathode/electrolyte interphase layer

Multifunctional Surface Construction for Long-Term Cycling Stability of Li-Rich Mn-Based Layered Oxide Cathode for Li-Ion Batteries

Stabilizing Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode by generating ion-conductive polymer coating layer with 1, 3-dioxolane introducing electrolyte for lithium-ion batteries

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Structure and Interface Design Enable Stable Li-Rich Cathode

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Building interface bonding and shield for stable Li-rich Mn-based oxide cathode

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

Modifying the Cathode–Electrolyte Interphase by Sulfone-Based Additive to Enhance the Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4

Reinforcing the Stability of Cobalt-free Lithium-rich Layered Oxides via Li-poor Ni-rich Surface Transformation

Simultaneous dual modification of Li-rich Mn-based cathode in restraining oxygen release and structure distortion

Tuning the Cathode‐Electrolyte Interphase Chemistry with Multifunctional Additive for High‐Voltage Li‐Ion Batteries

Rational Molecular Design of Electrolyte Additive Endows Stable Cycling Performance of Cobalt-Free 5 V-class Lithium Metal Batteries