Abstract:A lattice‐matched MTO coating has successfully been built on ultrahigh single‐crystal LiNi0.9Co0.05Mn0.05O2 particle by a neoteric in situ chemical reaction process, which can not only relieve lattice strain by avoiding inhomogeneity of the Li‐ion concentration, but also suppress cation mixing and irreversible oxygen loss for ensuring the smooth transportation of Li‐ion, thus preventing planar gliding and delamination cracking along the sliding planes. Planar gliding along with anisotropic lattice strain of single‐crystalline nickel‐rich cathodes (SCNRC) at highly delithiated states will induce severe delamination cracking that seriously deteriorates LIBs' cyclability. To address these issues, a novel lattice‐matched MgTiO3 (MTO) layer, which exhibits same lattice structure as Ni‐rich cathodes, is rationally constructed on single‐crystalline LiNi0.9Co0.05Mn0.05O2 (SC90) for ultrastable mechanical integrity. Intensive in/ex situ characterizations combined with theoretical calculations and finite element analysis suggest that the uniform MTO coating layer prevents direct contact between SC90 and organic electrolytes and enables rapid Li‐ion diffusion with depressed Li‐deficiency, thereby stabilizing the interfacial structure and accommodating the mechanical stress of SC90. More importantly, a superstructure is simultaneously formed in SC90, which can effectively alleviate the anisotropic lattice changes and decrease cation mobility during successive high‐voltage de/intercalation processes. Therefore, the as‐acquired MTO‐modified SC90 cathode displays desirable capacity retention and high‐voltage stability. When paired with commercial graphite anodes, the pouch‐type cells with the MTO‐modified SC90 can deliver a high capacity of 175.2 mAh g−1 with 89.8% capacity retention after 500 cycles. This lattice‐matching coating strategy demonstrate a highly effective pathway to maintain the structural and interfacial stability in electrode materials, which can be a pioneering breakthrough in commercialization of Ni‐rich cathodes.

Building interface bonding and shield for stable Li-rich Mn-based oxide cathode

Simultaneous dual modification of Li-rich Mn-based cathode in restraining oxygen release and structure distortion

Enabling Structural and Interfacial Stability Via Coherent Interface Li3BO3 Coating for Lithium-Rich Manganese-Based Cathodes

High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries

Constructing a robust Li-rich Mn-based oxide cathode with oxygen vacancies and strong B-O bonds by BN treatment

Enhancing the Stability of Li-Rich Mn-Based Oxide Cathodes Through Surface High-Entropy Strategy

Constructing a robust integrated surface structure for enhancing the performance of Li-rich Mn-based oxides cathodes

Stabilizing a Li–Mn–O Cathode by Blocking Lattice O Migration through a Nanoscale Phase Complex

Pseudo‐Bonding and Electric‐Field Harmony for Li‐Rich Mn‐Based Oxide Cathode

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

In Situ Induced Lattice‐Matched Interfacial Oxygen‐Passivation‐Layer Endowing Li‐Rich and Mn‐Based Cathodes with Ultralong Life

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

A well-matched MgNiO 2 surface heterointerface layer to enhance the cycling stability of cobalt-free Li-rich Mn-based cathode materials

Achieving high initial coulombic efficiency and low voltage dropping in Li-rich Mn-based cathode materials by Metal-Organic frameworks-derived coating

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Structure and Interface Design Enable Stable Li-Rich Cathode

Design of a new Li-rich Mn-based ternary cathode material based on Ni, Co, and Mn action mechanism

Constructing Targeted Strong Nb4d‐O2p‐Li2s Configurations to Obtain Excellent Energy Density and Long Life for Li‐rich Cathodes

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy