Abstract:Significant endeavours have been undertaken to advance the development of eco-friendly, abundant, cost-effective, and high-performance cathode materials for lithium-ion batteries. Among the various contenders for next-generation energy storage systems, spinel LiNi 0.5 Mn 1.5 O 4 has emerged as a leading high-voltage cathode candidate, owing to its aforementioned benefits. Nonetheless, the widespread adoption of LNMO-based lithium-ion batteries is substantially impeded by the electrochemical instability of conventional carbonate electrolytes above 4.5 V. High-voltage cycling of such batteries results in rapid capacity degradation and metal-ion dissolution from the LNMO electrode into the electrolyte, particularly at elevated temperatures, further causing deposition of metal-ions on anode electrode. Therefore, stabilizing the electrode/electrolyte interface is crucial to achieve improved electrochemical performance of the Li-ion cell at high voltages. The utilization of sacrificial electrolyte additives is regarded as a straightforward and efficacious method to accomplish this objective. These additives form a protective layer on the cathode surface, mitigating electrolyte decomposition and transition metal-ion dissolution and deposition on anode’s surface. Various additives facilitating high-voltage cathode materials have been documented, encompassing fluorides and sulfonates. However, borate salt-containing additives are particularly promising within this context. In the present study, we endeavour to elucidate the surface modifications transpiring on the electrode’s surface when minute quantities of borate-based salt are employed as an additive in the conventional EC:EMC electrolyte for high-voltage operation. We explored the impact of the additive salt in a standard LiPF 6 -EC/EMC base electrolyte on the discharge capacity and rate performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite based Li-ion cell. The electrochemical behaviour, morphological behaviour, and electrode-electrolyte interphase layer stability on the electrode were meticulously examined using high-resolution transmission electron microscopy (HR-TEM), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). These characterisations conformed the presence of an electrode-electrolyte interface forming a thin-layer via the sacrificial decomposition of the utilised additive. The introduction of this salt exhibits favourable effects on enhancing the electrochemical performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite in high-voltage lithium-ion batteries. Notably, the utilised additive excels in mitigating irreversible capacity loss and reducing cycling fade, as it preferentially decomposes and forms a conductive, protective film that impedes subsequent electrolyte decomposition, thereby substantially enhancing cell performance.

Optimizing interphase structure to enhance electrochemical performance of high voltage LiNi0.5Mn1.5O4 cathode via anhydride additives

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

A Multifunctional Additive Capable of Electrolyte Stabilization and Structure/Interphases Regulation of High‐Energy Li‐Ion Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Stabilized Cathode Interphase for Enhancing Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4 -Based Lithium-Ion Battery via cis -1,2,3,6-Tetrahydrophthalic Anhydride

Multifunctional Electrolyte Additive Stabilizes Electrode–Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

Tuning the Cathode‐Electrolyte Interphase Chemistry with Multifunctional Additive for High‐Voltage Li‐Ion Batteries

Anion-Acceptor Electrolyte Additive Strategy for Optimizing Electrolyte Solvation Characteristics and Electrode Electrolyte Interphases for Li||NCM811 Battery

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

Enhancing High‐Voltage LNMO Cathode Performance in Li‐Metal Batteries Via Anionic Electrolyte Additive‐Integrated CEI Engineering

Promotion of Li + desolvation and efficient cathode interphase formation by 4-aminobenzoic multifunctional electrolyte additive

Stabilizing the interphasial layer of Ni-rich cathode and graphite anode for lithium ion battery with multifunctional additive

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Development of Electrolyte Additives to Enable High-Voltage LiNi0.5Mn1.5O4 Lithium Ion Batteries

High-performance Li/LiNi0.8Co0.1Mn0.1O2 batteries enabled by optimizing carbonate-based electrolyte and electrode interphases via triallylamine additive

Modifying the Cathode–Electrolyte Interphase by Sulfone-Based Additive to Enhance the Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4

High-voltage electrolyte design for a Ni-rich layered oxide cathode for lithium-ion batteries

Anionic Additive-Integrated Electrolyte Therapy: Enhancing High-Voltage Stability and Performance in Lithium-Ion Batteries

Boosting High-Voltage Practical Lithium Metal Batteries with Tailored Additives

Regulating the Electrode-Electrolyte Interfaces of Lithium-High Nickel Batteries via a Multifunctional Additive

Improving the interfacial stability of Li1.2Mn0.54Ni0.13Co0.13O2 cathode and Li metal anode via dual electrolyte additives synergistic effect