Abstract:Electrochemical energy storage (EES) is still key to realize wide spread use of renewable energies. For large-scale EES production, the development of high energy density, non-toxic, cost-effective materials is necessary. In this study, a cobalt free active material, Lithium Nickel Manganese Oxide, LiNi0.5Mn1.5O4 (LNMO), was employed in the production of cathodes for high voltage lithium ion battery (LIB) applications. LNMO is an attractive cathode active material due to its high operating potential (~4.7 vs. Li/Li+ [1]), non-toxicity and low cost. The practical application of LNMO cathodes in LIBs has been relatively limited, especially for large scale application, due challenges associated with the material (i.e. electrolyte decomposition at high voltage, self-discharge and dissolution of the transition metals [2]). Electrolyte additives are an effective way to address these challenges, without major cost increase or changes to the production approach. In this study the role of different electrolyte additives in high-voltage full-cell LIBs with both graphite and silicon-graphite anodes is investigated. Additives known for their solid electrolyte interphase (SEI) forming ability (i.e. vinylene carbonate (VC) and fluoroethylene carbonate (FEC)), as well as additives that play additional roles such as cathode electrolyte interface formation or HF scavenging (i.e. tris(trimethylsilyl) phosphite (TMSP) and succinate anhydride (SA)), are used [3]. Galvanostatic cycling measurements were performed in 3-electrode cells in order to investigate the rate capability and long term cycling stability of LMNO/Gr and LMNO/Gr-Si full-cells with different electrolyte additives. The electrochemical characterization was verified with post mortem analysis to confirm the SEI composition, chemical and mechanical stability of the electrodes and lack of lithium plating. Post mortem investigations were done with Raman spectroscopy, scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX) and optical microscopy. Improved rate performance and better long term cycling stability of both full-cell chemistries was achieved for electrolytes containing the TMSP additive. References: [1] G. Gabrielli, M. Marinaro, M. Mancini, P. Axmann and M. Wohlfahrt-Mehrens, J. Power Sources 351 (2017) 35-44. [2] R. Amin, N. Muralidharan, R. K. Petla, H. Ben Yahia, S. A. Jassim Al-Hail, R. Essehli, C. Daniel, M. A. Khaleel, I. Belharouak, J. Power Sources, 467 (2020) 228318. [3] K. Kim, H. Ma, S. Park, N.-S. Choi, ACS Energy Lett., 5 (2020) 1537-1553.

A Multifunctional Additive Capable of Electrolyte Stabilization and Structure/Interphases Regulation of High‐Energy Li‐Ion Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

Tuning the Cathode‐Electrolyte Interphase Chemistry with Multifunctional Additive for High‐Voltage Li‐Ion Batteries

High-voltage electrolyte design for a Ni-rich layered oxide cathode for lithium-ion batteries

A Multifunctional Electrolyte Additive With Solvation Structure Regulation and Electrode/Electrolyte Interface Manipulation Enabling High‐Performance Li‐Ion Batteries in Wide Temperature Range

Self-purifying electrolyte enables high energy Li ion batteries

Stabilized High-Voltage Cathodes via an F-Rich and Si-Containing Electrolyte Additive

Regulating the Electrode-Electrolyte Interfaces of Lithium-High Nickel Batteries via a Multifunctional Additive

Interphase Regulation by Multifunctional Additive Empowering High Energy Lithium‐Ion Batteries with Enhanced Cycle Life and Thermal Safety

An electrolyte additive capable of scavenging HF and PF5 enables fast charging of lithium-ion batteries in LiPF6-based electrolytes

H-Transfer Mediated Self-Enhanced Interphase for High-Voltage Lithium-Ion Batteries

Optimizing interphase structure to enhance electrochemical performance of high voltage LiNi0.5Mn1.5O4 cathode via anhydride additives

Multifunctional Electrolyte Additive Stabilizes Electrode–Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

High-voltage ether-based electrolytes for lithium metal batteries via synergy between the solvent and additive

Developing multifunctional amide additive by rational molecular design for high-performance Li metal batteries

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

Tracing the Impact of Hybrid Functional Additives on a High-Voltage (5 V-class) SiOx-C/LiNi0.5Mn1.5O4 Li-Ion Battery System

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

Development of Electrolyte Additives to Enable High-Voltage LiNi0.5Mn1.5O4 Lithium Ion Batteries

Molecular Design of Asymmetric Cyclophosphamide as Electrolyte Additive for High-Voltage Lithium-Ion Batteries