Abstract:Lithium-ion batteries (LIBs) are key solutions to clean energy. Their high energy densities have led to the dominance of LIBs in mobile devices and electric vehicles. However, traditional electrolyte limits their operation at high voltage and extreme environmental temperatures. Here, we designed a new multifunctional electrolyte, in which lithium bis(fluorosulfonyl)imide (LiFSI) is used as salt and fluorinated diethyl carbonate (DFDEC) is used as the major solvent. With this optimized electrolyte, the graphite||LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) full cells are capable of fast-charging and can deliver long-term cycling with a cutoff voltage as high as 4.5V. Specifically, the battery shows the capacity retention of 84.3% after 500 cycles with an average coulombic efficiency (CE) as high as 99.93%. Synchrotron-based characterization suggests the formation of anion derived, LiF-rich interphases on the surfaces of both graphite anode and NMC811 cathode. Thanks to the fast ion transport and stable interphase, the cell in the optimized electrolyte demonstrates stable cycling behavior within a wide operating temperature. At high temperature (60 oC), the full cell delivers 88.8% of its initial capacity after 130 cycles at a high current density of 1C. At low temperature (-20 oC), the optimized electrolyte enables a capacity retention of 90.9% after 100 cycles when charging and discharging at 0.2C. Acknowledgment: The work done at Brookhaven National Laboratory was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Vehicle Technology Office of the U.S. DOE through Applied Battery Research for Transportation (ABRT) program under contract no. DE-SC0012704. The electrodes used in this study were produced at the U.S. Department of Energy’s (DOE) CAMP (Cell Analysis, Modeling and Prototyping) Facility, Argonne National Laboratory. The CAMP Facility is fully supported by the DOE Vehicle Technologies Office (VTO). This research used beamline 7-ID-2 (SST-2) of the National Synchrotron Light Source II, U.S. DOE Office of Science User Facilities, operated for the DOE Office of Science by Brookhaven National Laboratory under contract number DE-SC0012704. SEM measurements for this manuscript were performed at Center for Functional Nanomaterials, a U.S. DOE office of Science User Facility, at Brookhaven National Laboratory under the contract number DE-SC0012704.

A Multifunctional Electrolyte Additive With Solvation Structure Regulation and Electrode/Electrolyte Interface Manipulation Enabling High‐Performance Li‐Ion Batteries in Wide Temperature Range

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

A Multifunctional Additive Capable of Electrolyte Stabilization and Structure/Interphases Regulation of High‐Energy Li‐Ion Batteries

Concentrated Electrolytes Widen the Operating Temperature Range of Lithium‐Ion Batteries

Colloid Electrolyte with Changed Li+ Solvation Structure for High‐Power, Low‐Temperature Lithium‐Ion Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Interface Engineering via Manipulating Solvation Chemistry for Liquid Lithium‐Ion Batteries Operated ≥ 100 °C

A nitrile solvent structure induced stable solid electrolyte interphase for wide-temperature lithium-ion batteries

Anion-Containing Solvation Structure Reconfiguration Enables Wide-Temperature Electrolyte for High-Energy-Density Lithium-Metal Batteries

Non‐Flammable Electrolyte Enables High‐Voltage and Wide‐Temperature Lithium‐Ion Batteries with Fast Charging

Advanced Electrolytes for Fast‐Charging High‐Voltage Lithium‐Ion Batteries in Wide‐Temperature Range

Breaking the Temperature Limit of Lithium-Ion Batteries With Carbon Nanotube-Based Electrodes and "Constructive Alliance" Electrolyte Strategy

Synergy of Highly Reversible ω-Li 3 V 2 O 5 Anodes and Fluorine-Containing Additive Electrolytes Promises Low-Temperature-Tolerant Li-Ion Batteries

Partially sacrificial hybrid diluent regulated electrolytes boosting wide-temperature Li metal batteries

Interface Engineering via Regulating Electrolyte for High‐Voltage Layered Oxide Cathodes‐Based Li‐Ion Batteries

(Invited) Fluorinated Linear Carbonate Electrolyte for Lithium-Ion Batteries with Fast-Charging, High Voltage, and Wide Operating Temperatures

Ionic liquid-based electrolyte with dual-functional LiDFOB additive toward high-performance LiMn2O4 batteries

Revolutionizing multifunctional electrolyte additive design and synthesis for high-voltage nickel-rich batteries in diverse climates

Non-solvating fluorosulfonyl carboxylate enables temperature-tolerant lithium metal batteries

Enabling Ultra‐Low‐Temperature (‐70 °C) Lithium‐Ion Batteries: Advanced Electrolytes Utilizing Weak‐Solvation and Low‐Viscosity Nitrile Cosolvent

Competitive Coordination of Ternary Anions Enabling Fast Li‐Ion Desolvation for Low‐Temperature Lithium Metal Batteries