Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

A 56–66 GHz Quadrupler with 19.6db Conversion Gain and 2.6dbm Output Power in 65nm CMOS

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

Ultralow Power K-Band Frequency Doubler with Differential Output

A 19.5% Efficiency 51–73-Ghz High-Output Power Frequency Doubler in 65-Nm CMOS

A 5.1 Dbm 127–162 GHz Frequency Sextupler with Broadband Compensated Transformer-Based Baluns in 22nm FD-SOI CMOS

A Gm-boosted and current peaking wideband merged LNA and mixer

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

A High-Precision Ultra-Broadband Quadrature Generation at Millimeter-Wave Frequencies

A compact, fully differential D-band CMOS amplifier in 65nm CMOS

An 8.3% Efficiency 96–134 GHz CMOS Frequency Doubler Using Distributed Amplifier and Nonlinear Transmission Line

An X-Band Quadruple Frequency Multiplier in 65-Nm CMOS Process

Optimally Matched 189-232 GHz 6.8 dBm Output Power CMOS Frequency Doubler

A 26-38GHz Ultra-Wideband Balanced Frequency Doubler in 0.15µ m GaAs pHEMT Process

A 232GHz Frequency Multiplier Chain(×4) in 65-nm CMOS with Harmonic Rejection Ratio of 40dBc

A 91.9-113.2 GHz Compact Frequency Tripler with 44.6 dBc Peak Fundamental Harmonic-Rejection-Ratio Using Embedded Notch-filters and Area-Efficient Matching Network in 65 nm CMOS

A 60 GHz heterodyne quadrature transmitter with a new simplified architecture in 90nm CMOS

A Novel Four-Port Configuration With Improved Efficiency and Power-Handling Capability for Diode-Based Doublers in Submillimeter Waves

A Balanced Frequency Doubler Covering 140-220 GHz With an Efficiency of 6.8%-11.6%

A 60 Ghz Low Power Direct-Conversion Quadrature-Phase Transmitter In 130 Nm Cmos With Low Profile Cavity Backed Antenna

An Amplifier-Doubler Chain with Conversion Gain Improvement Techniques