Abstract:In this work, we combined the computational simulation and experiments to explore the convection on filling characteristics of the micro through-holes (THs) with multiple aspect ratio (ARs). The micro THs with ARs 6.25:1∼1.67:1 (thickness 500μm) were chosen as research targets. The computational model was established based on the actual state of Haring-Cell, and attention was fixed on the convection distribution in the micro THs. The interaction mechanism of additives with the changing ARs is systematically explored by electrochemical measurements. The simulation results show that the convection in the micro THs center declines with the increasing AR. The convection-dependent additives formed diverse adsorption states around the micro THs with different ARs, providing two kinds of Cu filling processes, including defect-free filling and insufficient filling. The weak convection is conducive to the adsorption of the accelerator and detrimental to the adsorption of the suppressor, which accelerates the Cu electrodeposition and elevates the throwing power (TP) value to over 100% to form the defect-free filling. Strong convection is instrumental in the adsorption of the leveler so that a uniform Cu film thickness can be obtained but to create the insufficient filling. Simulation and electroplating experiments show that the AR of 3.33:1 is the cut-off point of the flow field distribution and the electroplating processes. The micro THs with AR higher than 3.33:1 can be fully filled with a uniform bright Cu surface.

Copper Filling of High Aspect Ratio Through Ceramic Holes: Effect of Convection on Electrochemical Behavior of Additives

Potential-Dependence Of Additives Distribution In Copper Electrodeposition Via Filling

Electrochemical behaviors of additives in high Cu(II) concentration solution for high-aspect-ratio through ceramic holes filling

Influence of Electroplating Current Density on Through Silicon Via Filling

Study on the behaviors of Cu filling in special through-silicon-vias by the simulation of electric field distribution

Modeling the Bottom-Up Filling of Through Silicon Vias with Different Additives

Electrochemical Analysis of Cathode in TSV Copper Electroplating

Promotion of High-Speed Copper-Filling Performance for Interconnections with Increasing Aspect-Ratio Using Compound Additives

Effect of additives on copper electroplating profile for TSV filling

Understanding Effect of Additives in Copper Electroplating Filling for Through Silicon Via

Influence of Convection-Dependent Adsorption of Additives on Microvia Filling by Copper Electroplating

Computational and experiments exploration of convection on Cu filling characteristics of multiple aspect-ratio micro through-holes

Preparation of Porous Au Electrode Used for Additives Investigation in Copper Filling

Evaluating Copper Plating Process for Filling Micro Vias with Thin Surface Cu by the 1-(4-carboxyphenyl)-5-mercapto-1h-tetrazole Additive

Experiment and simulation of single inhibitor SH110 for void-free TSV copper filling

Investigations of the electrochemical performance and filling effects of additives on electroplating process of TSV

Synergistic Effect of Additives on Filling of Tapered TGV Vias by Copper Electroplating

Evaluating the Via Filling Performance with Thin Surface Cu by the Synergistic Effect of Different Additives

Through silicon via filling by copper electroplating in acidic cupric methanesulfonate bath

Effect of External Factors on Copper Filling in 3D Integrated Through-Silicon-Vias (TSVs)

Through-Hole Filling by Copper Electroplating Using Sodium Thiazolinyl-Dithiopropane Sulfonate As the Single Additive