Abstract:Hot pressing was used to produce compact ceramic samples with the following composition (wt.%): 60 ZrB2 + 20 SiC + 20 (Al2O3 + 32 t-ZrO2). The tetragonal modification of zirconium oxide in the eutectic was stabilized by yttrium oxide. The porosity of the samples was 3–5%. The mechanical properties of the ceramics (hardness HV, fracture toughness KIc, tensile strength δf, compressive strength Y, grain-boundary strength S, and bending strength σ) were studied. Analysis of the microstructure and elemental composition of the phases revealed that a defect-free structure developed in the ZrB2-based composite through strong Van Der Waals adhesive interaction at the SiC–Al2O3 interface, which increased the fracture toughness to 9.4 MPa ∙ m1/2. In turn, this increased the grain strength from 0.64 GPa for the basic composite to 3.46 GPa for the ZrB2–SiC composite with an oxide addition. An addition of Al2O3 + 32 wt.% t-ZrO2 was introduced in sufficient quantities not only to reduce the fracture stress but also to promote plastic deformation of the material for high-temperature bending strength. Study of the oxidation process showed that the weight increment of the 60 wt.% ZrB2 + 20 wt.% SiC + 20 wt.% (Al2O3 + 32 wt.% t-ZrO2) sample at 1600°C for a holding time of 1 h was stabilized by dense oxide scale formed on the material, while the weight increment of the ZrB2 + 20 wt.% SiC sample and, consequently, the scale thickness increased monotonically. The scale that formed on the ZrB2 + 20 wt.% SiC samples with an addition of Al2O3 + 32 wt.% t-ZrO2 consisted of an upper Al2SiO5-based layer 50 μm thick with ZrO2 inclusions and a lower ZrO2-based layer up to 80 μm thick with Al2SiO5 inclusions. The eutectic Al2O3 + 32 wt.% t-ZrO2 oxide addition to the basic ZrB2–SiC system had higher oxidation resistance and thus prevented the diffusion of oxygen into the material.

Design and Preparation of an Ultra-High Temperature Ceramic by In-Situ Introduction of Zr2[Al(Si)]4C5 into ZrB2-SiC: Investigation on the Mechanical Properties and Oxidation Behavior

High-temperature Oxidation Behavior of Monolithic Zr3[Al(Si)]4C6 and Its Composite Incorporating 30vol% ZrB2-SiC: Providing a Basis for Broadening the Service Temperature

In Situ Synthesis, Mechanical Properties, and Oxidation Resistance of (sic+zrb2)/zr3[al(si)]4c6 Composites

Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics

Oxidation Resistance of Zr2(Al(Si))4C5-based Composites at Ultra-High Temperature

Preparation And Properties Of Dense Zrb2 Composite Reinforced By Elongated Sic And Al3bc3 Grains

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

High‐Temperature Oxidation at 1900°C of ZrB2–xSiC Ultrahigh‐Temperature Ceramic Composites

Isothermal Oxidation of Zr2[Al(Si)]4C5–SiC Composites at 1000–1300°C in Air

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B<sub>2</sub>-Zr(Hf)C-SiC Composites

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B<sub>2</sub>-Zr(Hf)C-SiC Composites

Microstructure, Mechanical, and Thermal Properties of in Situ-Synthesized (zrb2+sic)/zr2[al(si)]4c5 Composites

Mechanical and Corrosion Properties of ZrB2–SiC Composite Ceramics with Oxide Additions

Long-term oxidation and ablation behavior of C<sub>f</sub>/ZrB<sub>2</sub>-SiC composites at 1500, 2000, and 2200C

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Oxidation Kinetics of Hot-Pressed ZrB2–SiC Ceramic Matrix Composites

Temperature‐dependent mechanical and oxidation behavior of in‐situ formed ZrN/ZrO2‐containing Si3N4‐based composite

Enhanced Mechanical Properties, Thermal Shock Resistance and Oxidation Resistance of Si2BC3N Ceramics with Zr-Al Addition

Oxidation Behavior of ZrC-based Composites in Static Laboratory Air Up to 1300 °C

Preparation of oxidation protective ZrB 2 –SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites

Effect of boronizing treatment on the oxidation resistance of Zr2(AlSi)4C5/SiC composite

Design and Preparation of an Ultra-High Temperature Ceramic by In-Situ Introduction of Zr2[Al(Si)]4C5 into ZrB2-SiC: Investigation on the Mechanical Properties and Oxidation Behavior

High-temperature Oxidation Behavior of Monolithic Zr3[Al(Si)]4C6 and Its Composite Incorporating 30vol% ZrB2-SiC: Providing a Basis for Broadening the Service Temperature

In Situ Synthesis, Mechanical Properties, and Oxidation Resistance of (sic+zrb2)/zr3[al(si)]4c6 Composites

Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics

Oxidation Resistance of Zr2(Al(Si))4C5-based Composites at Ultra-High Temperature

Preparation And Properties Of Dense Zrb2 Composite Reinforced By Elongated Sic And Al3bc3 Grains

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

High‐Temperature Oxidation at 1900°C of ZrB2–xSiC Ultrahigh‐Temperature Ceramic Composites

Isothermal Oxidation of Zr2[Al(Si)]4C5–SiC Composites at 1000–1300°C in Air

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B&lt;sub&gt;2&lt;/sub&gt;-Zr(Hf)C-SiC Composites

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B<sub>2</sub>-Zr(Hf)C-SiC Composites

Microstructure, Mechanical, and Thermal Properties of in Situ-Synthesized (zrb2+sic)/zr2[al(si)]4c5 Composites

Mechanical and Corrosion Properties of ZrB2–SiC Composite Ceramics with Oxide Additions

Long-term oxidation and ablation behavior of C<sub>f</sub>/ZrB<sub>2</sub>-SiC composites at 1500, 2000, and 2200C

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Oxidation Kinetics of Hot-Pressed ZrB2–SiC Ceramic Matrix Composites

Temperature‐dependent mechanical and oxidation behavior of in‐situ formed ZrN/ZrO2‐containing Si3N4‐based composite

Enhanced Mechanical Properties, Thermal Shock Resistance and Oxidation Resistance of Si2BC3N Ceramics with Zr-Al Addition

Oxidation Behavior of ZrC-based Composites in Static Laboratory Air Up to 1300 °C

Preparation of oxidation protective ZrB 2 –SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites

Effect of boronizing treatment on the oxidation resistance of Zr2(AlSi)4C5/SiC composite

Preparation and Microstructure Characterizations of Novel C/C-Zr(Hf)B<sub>2</sub>-Zr(Hf)C-SiC Composites