Abstract:To further the anti-ablation property of carbon/carbon composites (C/Cs) at extreme-high temperature, Cr-ZrC coating is fabricated on SiC-coated C/Cs. The anti-ablation properties of the ZrC coatings modified by various content of Cr are tested by oxyacetylene flame (heat flux: 2.4 MW/m(2)). Compared with pure ZrC coating, the ablation resistance property of the sprayed Cr-ZrC coating indicates an effective improvement. Cr acts as an accelerant by facilitating the liquid ZrO2 sintering and form a close structure. This dense structure can alleviate oxygen penetration. As the content of Cr increase (10 wt%, 15 wt% and 20 wt%), after cooling can also detect the retaining of tetragonal-ZrO2 (t-ZrO2). The phase transformation from t-ZrO2 to monoclinic ZrO2 (m-ZrO2) can lead to the volume expansion. The retaining of t-ZrO2 shows the phase transformation is impeded, which contributes to the thermal stability of the Cr modified ZrC coating. In the specimen, oxygen mainly diffuse through micropores, microcracks and grain boundaries. For Cr-ZrC coating, these diffuse ways could be partly or completely sealed by melted Zr-O-Cr coating during ablation test, which can effectively protect C/Cs during the oxyacetylene ablation test. When the content of Cr is 15 wt%, on the surface can form dense dendritic structure, which can effectively protect C/Cs from ablation.

Ablation Mechanism and Properties of ZrB2-ZrC-SiC Coating with Micro-Submicron Reinforced Structure

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Microstructure and Ablation Behavior of W/ZrC/SiC Coating on C/C Composites Prepared by Reactive Melt Infiltration and Atmospheric Plasma Spraying

Ablation Behavior of ZrB 2 -Based Coating Prepared by Supersonic Plasma Spraying for SiC-Coated C/C Composites under Oxyacetylene Torch

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Investigation on Ablation Characteristics of C/C Composites with ZrC/SiC Coating

Microstructures and Ablation Resistance of Zrc Coating for Sic-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying

Ablation Resistant Properties And Mechanism Of Zrc Coating Deposited By Plasma-Spraying

Microstructure Characteristics and Ablation Behavior of an Al1.92 Cr0.08 O3-SiC-ZrC Anti-Ablation Coating

ZrB2-SiC coating to protect carbon/carbon composites against ablation

Preparation and Ablation Behavior of a ZrB2-SiC Coating-Matrix Integrated C/C Composite

Microstructures and Ablative Properties of ZrC Coating by Chemical Vapor Deposition

Microstructure and Ablation Mechanism of SiC-ZrC-Al2O3 Coating for SiC Coated C/C Composites under Oxyacetylene Torch Test

Ablation characteristics of mosaic structure ZrC-SiC coatings on low-density, porous C/C composites

Ablation Behavior of ZrC–SiC Coated C/C–ZrC–SiC Composites Prepared by Precursor Infiltration Pyrolysis Combined with Reactive Melt Infiltration

Study on the Ablation Resistance of ZrB2-SiC-LaSi2 Coating Prepared on the C/C Composites

Preparation and ablation properties of ZrC-SiC coating for carbon/carbon composites by solid phase infiltration

A Multilayer SiC/ZrB2/SiC Ablation Resistance Coating for Carbon/Carbon Composites

Microstructure and High Temperature Anti-Ablation Behavior of Cr-modified ZrC Coating for SiC-coated Carbon/carbon Composites

Ablation resistance and mechanism of SiC/ZrC-ZrB2 double layer coating for C/C composites under plasma flame

A ZrCSiC/SiC multilayer anti-ablation coating for ZrC modified C/C composites