Abstract:The corrosion and leakage issues of rapid quench boilers have become increasingly prominent in ethylene plants, significantly disrupting the regular functioning of equipment. In pursuit of a more efficacious corrosion protection strategy, a study was conducted on the heat exchange tubes experiencing corrosion leakage in the quenching boiler of a petrochemical company. By means of macroscopic observation, chemical composition analysis, mechanical property analysis, metallographic analysis, fracture surface morphology observation, and energy spectrum analysis, combined with on-site process parameters, a comprehensive analysis of the failure causes of the corroded leakage sites was conducted. It was concluded that the perforation of the heat exchange tubes was caused by high-temperature oxygen corrosion and oxidation induced by scale accumulation, and reasonable countermeasures were proposed. According to X-ray diffraction analysis (XRD), it was found that the scale mainly consisted of Fe2O3 and Fe3O4, and the scale formation time was relatively long. It is speculated that the accumulation of scale is caused by the rust from the upstream equipment pipelines of the boiler water being carried into the quenching boiler with the fluid flow and accumulating at this location. Regarding the heat exchange tubes, the primary causes of failure are high-temperature oxygen corrosion and oxidation. To verify whether the relevant reactions can occur spontaneously, the critical transition temperature of the reactions is calculated using the free entropy function method. The calculated critical temperature for the occurrence of high-temperature oxygen corrosion and oxidation in the heat exchange tubes under failure conditions is determined to be T ＜ 1058 K ~ 785 °C. Therefore, under the conditions of heat exchange tube failure, high-temperature oxygen corrosion and oxidation can occur spontaneously.

Failure analysis on abnormal leakage of radiator for high-speed train transformer

Cause Analyses of the Weld Seam Cracks of a Prehydrogenating Reactor

Failure Analysis on Abnormal Leakage Between Tubes and Tubesheet of Spiral-Wound Heat Exchanger for Nuclear Power Plant

Failure analysis on abnormal cracking of polycarbonate plates used in the gearbox oil level gauge for high-speed train

Failure Analysis on Abnormal Bursting of Heat Transfer Tubes in Spiral-Wound Heat Exchanger for Nuclear Power Plant

Failure analysis of a rapid quench boiler for ethylene cracker

Failure Analysis on Abnormal Leakage of Shell and Tube Heat Exchanger in Specialty Chemical Plant

Failure Analysis and Countermeasure of Heat Exchangers in Nuclear Power Facility

Failure Analysis of Leakage on Titanium Tubes Within Heat Exchangers in a Nuclear Power Plant. Part II: Mechanical Degradation

Failure Analysis on Abnormal Cracking of the Baffle in the Automatic Passing Neutral Section Sensor for High-Speed Trains

Failure Analysis on Leaked Jacket Pipe of Double-Pipe Heat Exchanger in High-Pressure Polyethylene Facility

Failure Analysis on Water Wall Tube Burst of Heating Furnace

Failure analysis of leaking firefighting pipeline used in nuclear power plant: Corrosion development process and key influence factors

Leakage of water-cooled wall tube in subcritical boiler

Failure analysis on leaked titanium tubes of seawater heat exchangers in recirculating cooling water system of coastal nuclear power plant

Cause and mechanism analysis of cracking and leakage of water wall tube

Failure Analysis on Unexpected Fracture of the Hydraulic Expansion Mandrel for Tube to Tubesheet Expanding in the Steam Generator of Nuclear Power Plant

Failure Analysis on Abnormal Leakage of TP321 Stainless Steel Pipe of Medium Temperature Shifting Gas in Hydrogen Production System

Failure Analysis on Abnormal Corrosion of Economizer Tubes in a Waste Heat Boiler

Failure analysis of the TP347H austenitic stainless steel tube of boiler reheater in a coal-fired power plant

Failure Analysis on Fin Tube Corrosion of Air-cooled Heat Exchanger