Low-temperature Fe–MnO2 Nanotube Catalysts for the Selective Catalytic Reduction of NOx with NH3

Hao Fan,Jie Fan,Tian Chang,Xiuru Wang,Xin Wang,Yu Huang,Yang Zhang,Zhenxing Shen

DOI: https://doi.org/10.1039/d1cy01181b

IF: 6.177

2021-01-01

Catalysis Science & Technology

Abstract:Fe improved the reducibility of Mn sites and reduced the oxidizing properties of bridging oxygen.

What problem does this paper attempt to address?

Low-temperature Fe–MnO 2 nanotube catalysts for the selective catalytic reduction of NO x with NH 3

Hao Fan,Jie Fan,Tian Chang,Xiuru Wang,Xin Wang,Yu Huang,Yang Zhang,Zhenxing Shen

DOI: https://doi.org/10.1039/d1cy01181b

2021-01-01

Abstract:Fe improved the reducibility of Mn sites and reduced the oxidizing properties of bridging oxygen.

chemistry, physical
Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Dong Ye,Kai Zhu,Yiwei Zhang,Jingyi Feng,Shujie Gao,Xiaoxiang Wang,Ke Wu

DOI: https://doi.org/10.1016/j.joei.2024.101814

IF: 6.47

2024-01-01

Journal of the Energy Institute

Abstract:This study presents the synthesis of a series of FeOx-NbOx mixed oxide catalysts for the selective catalytic reduction (SCR) of NO by NH3. By meticulously controlling the Fe/Nb molar ratio, we have rationally tailored the proceeding of the main reaction of NO reduction and the side reaction of NH3 oxidation to NOx. The incorporation of NbOx introduced a significant number of acid sites, which enhanced the adsorption of NH3 on the catalyst surface, particularly at elevated temperatures. Additionally, the oxidative capacity of the catalyst was moderated by the addition of NbOx, hindering the over-oxidation of NH3 to NO or NO2, thus preserving more NH3 to act as a reductant for NO reduction. Consequently, the NbOx-enriched samples exhibited improved deNO(x) performance. However, an excessive amount of NbOx led to a notably weakened oxidative ability, which negatively impacted the activation of reactants and resulted in decreased NO conversion at lower temperatures. The optimized catalyst presented >80 % NO conversion and >95 % N-2 selectivity within a temperature range of 250-400 degrees C. These findings offer valuable insights for the development of new catalysts with an extended operational temperature window.
Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Fe–Mn Mixed-Oxide Catalysts Containing Fe3Mn3O8 Phase

Zhihang Chen,Furong Wang,Hua Li,Qing Yang,Lefu Wang,Xuehui Li

DOI: https://doi.org/10.1021/ie201894c

2012-01-01

Industrial & Engineering Chemistry Research

Abstract:Novel Fe-Mn mixed-oxide catalysts were prepared for the low-temperature selective catalytic reduction (SCR) of NOx with ammonia in the presence of excess oxygen. It was found that Fe(0.4)-MnOx catalyst showed the highest activity, yielding 98.8% NOx conversion and 100% selectivity of N-2 at 120 degrees C at a space velocity of 30 000 h(-1). XRD results suggested that a new crystal phase of Fe3Mn3O8 was formed in the Fe-MnOx catalysts. TPR and Raman data showed that there was a strong interaction between the iron oxide and manganese oxide, which is responsible for the formation of the active center-Fe3Mn3O8. Intensive analysis of fresh, used, and regenerated catalysts by XPS revealed that electron transfer between Fen+ and Mnn+ ions in Fe3Mn3O8 may account for the long lifetime of the Fe (0.4)-MnOx catalyst. In addition, the SCR activity was suppressed a little in the presence of SO2 and H2O, but it was reversible after their removal.
Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

Xiaobo Wang,Shiguo Wu,Weixin Zou,Shuohan Yu,Keting Gui,Lin Dong

DOI: https://doi.org/10.1016/s1872-2067(15)61115-9

2016-01-01

Abstract:A series of Fe-Mn/Al2O3 catalysts were prepared and studied for low temperature selective catalytic reduction (SCR) of NO with NH3 in a fixed-bed reactor. The effects of Fe and Mn on NO conversion and the deactivation of the catalysts were studied. N2 adsorption-desorption, X-ray diffraction, transmission electron microscopy, energy dispersive spectroscopy, H2 temperature-programmed reduction, NH3 temperature-programmed desorption, X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis and Fourier transform infrared spectroscopy were used to characterize the catalysts. The 8Fe-8Mn/Al2O3 catalyst gave 99% of NO conversion at 150 °C and more than 92.6% NO conversion was obtained in a wide low temperature range of 90–210 °C. XPS analysis demonstrated that the Fe3+ was the main iron valence state on the catalyst surface and the addition of Mn increased the accumulation of Fe on the surface. The higher specific surface area, enhanced dispersion of amorphous Fe and Mn, improved reduction properties and surface acidity, lower binding energy, higher Mn4+/Mn3+ ratio and more adsorbed oxygen species resulted in higher NO conversion for the 8Fe-8Mn/Al2O3 catalyst. In addition, the SCR activity of the 8Fe-8Mn/Al2O3 catalyst was only slightly decreased in the presence of H2O and SO2, which indicated that the catalyst had better tolerance to H2O and SO2. The reaction temperature was crucial for the SO2 resistance of catalyst and the decrease of catalytic activity caused by SO2 was mainly due to the sulfate salts formed on the catalyst.
Fe and Mn mixed oxide catalysts supported on Sn-modified TiO 2 for the selective catalytic reduction of NO with NH 3 at low temperature

Zhitao Han,Huan Du,Duo Xu,Yu Gao,Shaolong Yang,Liguo Song,Jingming Dong,Xinxiang Pan

DOI: https://doi.org/10.1039/d1nj05290j

IF: 3.3

2022-01-01

New Journal of Chemistry

Abstract:FeMn/Sn x TiO 2 catalysts were synthesized by introducing Sn as an additive to modify TiO 2 supports, and the Sn doping could improve the SO 2 tolerance and low-temperature SCR activity significantly.

chemistry, multidisciplinary
Low-Temperature Reduction of NOx by NH3 with Unity Conversion on Nanofilament MnO2/Activated Semi-Coke Catalyst

Beini He,Hankun Li,Shuoyang Liang,Xidong Wang,Hao Wang,Yiou Wang

DOI: https://doi.org/10.1002/chem.202401803

2024-10-17

Chemistry

Abstract:Selective catalytic reduction of nitrogen oxides with NH3 at low temperatures remains a crucial goal for industrial applications. However, effective catalysts operating at 70-90 °C are rarely reported, limiting SCR scenarios to high-temperature conditions. Herein, we report a unique MnO2 nanofilament catalyst grown on activated semi-coke synthesized via a one-step in situ hydrothermal approach, which exhibits a stable and marked 100 % conversion rate of NO to N2 with 100 % selectivity at 90 °C, superior to the other prepared structures (nanowires, nanorods, and nanotubes). Temperature-programmed desorption shows a large number of acid sites on MnO2(NFs)/ASC, benefiting the formation of NH4 + ions. Meanwhile, diffuse reflectance infrared Fourier transform spectroscopy reveals the activation of NO with O2 to form bidentate nitrate/bridging nitrate NO2 intermediates via bidentate nitrate species, triggering the Fast SCR with NH3 at low temperatures. Such an effective, easy-to-prepare, and low-cost catalyst paves a new pathway for low-temperature SCR for a wide range of application scenarios.
Catalytic Reduction of NO_x over MnO_x Coated TiO_2 Nanotube Arrays

Zhao Chongbin,Yang Hangsheng,Zhou Huan,Qiu Famin,Zhang Xiaobin

DOI: https://doi.org/10.3724/sp.j.1088.2011.01127

2011-01-01

CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION)

Abstract:Catalytic reduction of NOx with NH3 was studied over MnOx coated TiO2 nanotube arrays prepared by anodic oxidation. When the MnOx was deposited inside the TiO2 nanotubes, the good NOx removal efficiency was achieved at relatively low reaction temperature, such that the NOx removal efficiency of over 90% was always obtained at 150-250 degrees C, and it reached 99.9% at 200 degrees C. However, when the reaction temperature was higher than 250 degrees C, a suppression of NOx removal was observed. This is probably because the diffusion of NO molecules into TiO2 nanotubes was controlled by Knudson diffusion.
Catalytic Reduction of NO by NH3 over Fe–Cu–OX/CNTs-TiO2 Composites at Low Temperature

Zhaoxia Ma,Hangsheng Yang,Qian Li,Junwei Zheng,Xiaobin Zhang

DOI: https://doi.org/10.1016/j.apcata.2012.03.028

2012-01-01

Abstract:Activity of iron–copper oxides supported on TiO2 and carbon nanotubes (CNTs) for low-temperature selective catalytic reduction of NO by NH3 in the presence of oxygen was investigated. The addition of FeOX and CNTs synergistically promoted the NO conversion through the adsorption of NO and NH3 and the catalytic oxidation of NO to NO2. NO2 adsorbed on the surface of the catalysts was found to be essential for NO reduction at low temperature, and approximately 90% NO conversion could be achieved at reaction temperature as low as 150°C. Moreover, it was found that the deactivation caused by H2O could be recovered after H2O was switched off, while the deactivation caused by SO2 was dependent on the reaction temperature.
Catalytic Reduction of NOx with NH3 over Different-Shaped MnO2 at Low Temperature

Wei Tian,Hangsheng Yang,Xiaoyu Fan,Xiaobin Zhang

DOI: https://doi.org/10.1016/j.jhazmat.2011.01.078

IF: 13.6

2011-01-01

Journal of Hazardous Materials

Abstract:MnO(2) nanotubes, nanorods, and nanoparticles were prepared using a hydrothermal method, after which the different activities for selective catalytic reduction (SCR) of nitrogen oxides (NO(x)) were compared. MnO(2) nanorods performed the highest activity for reduction of NO(x) under a gas hourly space velocity of 36,000 h(-1) with conversion efficiencies of above 90% between 250 and 300 °C; it also had the highest removal efficiency of 98.2% at 300 °C. From the analysis of X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, temperature-programmed desorption, and temperature-programmed reduction, we can ascribe the high activity of MnO(2) nanorods to low crystallinity, more lattice oxygen, high reducibility, and a large number of strong acid sites. The apparent activation energy of the SCR reaction on the surface of nanorods was calculated to be 20.9 kJ/mol, which favored the reaction better than the other catalysts.
CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Shun Li,Zuquan Zheng,Zhicheng Zhao,Youling Wang,Yao Yao,Yong Liu,Jianming Zhang,Zuotai Zhang

DOI: https://doi.org/10.3390/molecules27154863

IF: 4.6

2022-01-01

Molecules

Abstract:CeO2 nanoparticle-loaded MnO2 nanoflowers, prepared by a hydrothermal method followed by an adsorption-calcination technique, were utilized for selective catalytic reduction (SCR) of NOx with NH3 at low temperatures. The effects of Ce/Mn ratio and thermal calcination temperature on the NH3-SCR activity of the CeO2-MnO2 nanocomposites were studied comprehensively. The as-prepared CeO2-MnO2 catalysts show high NOx reduction efficiency in the temperature range of 150-300 degrees C, with a complete NOx conversion at 200 degrees C for the optimal sample. The excellent NH3-SCR performance could be ascribed to high surface area, intimate contact, and strong synergistic interaction between CeO2 nanoparticles and MnO2 nanoflowers of the well-designed composite catalyst. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTs) characterizations evidence that the SCR reaction on the surface of the CeO2-MnO2 nanocomposites mainly follows the Langmuir-Hinshelwood (L-H) mechanism. Our work provides useful guidance for the development of composite oxide-based low temperature NH3-SCR catalysts.
Synthesis, Characterization and Catalytic Performance of Femntiox Mixed Oxides Catalyst Prepared by A Ctab-Assisted Process for Mid-Low Temperature Nh3-Scr

Shiguo Wu,Lei Zhang,Xiaobo Wang,Weixin Zou,Yuan Cao,Jinfang Sun,Changjin Tang,Fei Gao,Yu Deng,Lin Dong

DOI: https://doi.org/10.1016/j.apcata.2015.08.009

2015-01-01

Abstract:A series of FeMnTiOx mixed oxides catalysts, which were synthesized by a CTAB-assisted co-precipitation process and calcined at different temperatures, were investigated for selective catalytic reduction of NO with NH3 in the presence of excess O-2. The samples were characterized by means of N-2-physisorption, XRD, TEM, H-2-TPR, XPS, NH3-TPD, and in situ DRIFTS technologies. The results indicated that the activities of samples were not predominately determined by BET specific surface area. Compared with amorphous TiO2, the anatase TiO2 crystalline phase was more conducive to enhance the electron interaction between manganese species and support: Mn4+ + Ti3+ <-> Mn3+ + Ti4+center dot NH3 was easier to be activated on the surface of samples which had lower binding energy of lattice oxygen in selective catalytic reduction of NO with NH3. The addition of CAB not only promoted the formation of anatase TiO2 crystalline phase and Lewis acid sites, but also improved the dispersion extent of active phase on the surface of samples. Thus, it enhanced the catalytic performance of samples. In addition, calcination temperature had an important influence on the valence state of manganese species, as well as the dispersion extent of active phase and the crystal phase structure of support. The sample calcined at 4000 degrees C showed excellent low-temperature activity and mid-temperature N-2 selectivity. The NO conversion and N-2 selectivity of this sample were above 90% in the range of 150-350 degrees C at a space velocity of 30,000 mL g(-1) h(-1). Furthermore, it exhibited sulfur tolerance and water resistance to a certain extent. (C) 2015 Elsevier B.V. All rights reserved.
Selective catalytic reduction of NOX with ammonia over Mn–Ce–OX/TiO2-carbon nanotube composites

Xiaoyu Fan,Famin Qiu,Hangsheng Yang,Wei Tian,Tianfeng Hou,Xiaobin Zhang

DOI: https://doi.org/10.1016/j.catcom.2011.05.011

IF: 3.51

2011-01-01

Catalysis Communications

Abstract:Mn–Ce–OX catalysts loaded on TiO2-carbonaceous materials were prepared by sol–gel method. Selective catalytic reduction of NOX was conducted in a fixed-bed flow-reactor over catalysts coated on aluminum plates. A de-NOX efficiency of more than 90% was obtained over the Mn–Ce–OX/TiO2-carbon nanotubes (CNTs) catalyst between 75°C and 225°C under a gas hourly space velocity (GHSV) of ~36,000h−1. This activity improvement is attributed to the increase of the BET surface area, and the occurrence of reaction between adsorbed NOX and NH3. Moreover, the de-NOX efficiency was increased to 99.6% by adding 250ppm SO2 between 100°C and 250°C.
In situ synthesis of low-valence MnO/Mn 3 O 4 catalyst via carbon-acid hydrothermal strategy for NO removal

Bo Peng,Shuoyang Liang,Hao Wang,Zhao Meng,Min Guo,Haijuan Wang,Mei Zhang

DOI: https://doi.org/10.1016/j.matlet.2022.133044

IF: 3

2022-08-29

Materials Letters

Abstract:A rational design of high dispersion MnO/Mn 3 O 4 catalysts based on carbon-acid hydrothermal strategy was proposed for selective catalytic reduction of NO at low temperature. The reaction mechanisms of low valence manganese coordination and catalytic path were revealed through active site analysis and in-situ DRIFTS characterization. The results showed that reasonable low valence manganese nanofibers cooperated to derive hierarchical mesoporous structure and abundant surface active oxygen. The chemisorbed oxygen specie cooperated with Lewis acid sites accelerated the production of NO 2 in the catalytic process and realized high-efficiency NO removal at ultra-low temperature. Such a facile preparation method of low valence manganese nanofibers structure widens the way for NH 3 -SCR of NO in industrial practice.

materials science, multidisciplinary,physics, applied
Cr–MnO Mixed-Oxide Catalysts for Selective Catalytic Reduction of NO with NH3 at Low Temperature

Zhihang Chen,Qing Yang,Hua Li,Xuehui Li,Lefu Wang,Shik Chi Tsang

DOI: https://doi.org/10.1016/j.jcat.2010.08.016

IF: 7.3

2010-01-01

Journal of Catalysis

Abstract:Cr-Mn mixed-oxide based catalysts were prepared for the low-temperature selective catalytic reduction of NOx with ammonia in the presence of excess oxygen it was found that the Cr(0 4)-MnOx showed the highest activity and yielded 98 5% NOx conversion at 120 degrees C XRD TPR and Raman data results suggested that a crystalline phase of CrMn1 O-5(4) was present in the Cr-MnOx catalysts which contained the active species XPS results of fresh used and regenerated Cr(0 4)-MnOx catalysts illustrated clearly the presence of Mn2+ Mn3+ Mn4+ and Cr2+ Cr3+ Cr5+ oxidation states Efficient electron transfer between Cr and Mn in the crystal of CrMn1 O-5(4) was thought to be the reason for the high activity and long lifetime of the Cr(0 4)-MnOx catalyst In addition the SCR activity was gradually suppressed in the presence of SO2 while such an effect was shown to be reversible after switching off the SO2 injection (C) 2010 Elsevier Inc All rights reserved
Highly dispersed MnOx–FeOx supported by silicalite-1 for the selective catalytic reduction of NOx with NH3 at low temperatures

Jialiang Gu,Bingjun Zhu,Rudi Duan,Yan Chen,Shaoxin Wang,Lili Liu,Xidong Wang

DOI: https://doi.org/10.1039/d0cy00001a

2020-01-01

Abstract:MnOx–FeOx-Loaded silicalite-1 catalysts exhibit high NOx conversion at low temperatures.
Low-temperature Selective Catalytic Reduction of NO with NH3 over Nanoflaky MnOx on Carbon Nanotubes in Situ Prepared Via a Chemical Bath Deposition Route

Cheng Fang,Dengsong Zhang,Sixiang Cai,Lei Zhang,Lei Huang,Hongrui Li,Phornphimon Maitarad,Liyi Shi,Ruihua Gao,Jianping Zhang

DOI: https://doi.org/10.1039/c3nr02631k

IF: 6.7

2013-01-01

Nanoscale

Abstract:Nanoflaky MnO(x) on carbon nanotubes (nf-MnO(x)@CNTs) was in situ synthesized by a facile chemical bath deposition route for low-temperature selective catalytic reduction (SCR) of NO with NH₃. This catalyst was mainly characterized by the techniques of X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), N₂ adsorption-desorption analysis, X-ray photoelectron spectroscopy (XPS), H₂ temperature-programmed reduction (H₂-TPR) and NH₃ temperature-programmed desorption (NH₃-TPD). The SEM, TEM, XRD results and N₂ adsorption-desorption analysis indicated that the CNTs were surrounded by nanoflaky MnO(x) and the obtained catalyst exhibited a large surface area as well. Compared with the MnO(x)/CNT and MnO(x)/TiO₂ catalysts prepared by an impregnation method, the nf-MnO(x)@CNTs presented better NH₃-SCR activity at low temperature and a more extensive operating temperature window. The XPS results showed that a higher atomic concentration of Mn(4+) and more chemisorbed oxygen species existed on the surface of CNTs for nf-MnO(x)@CNTs. The H₂-TPR and NH₃-TPD results demonstrated that the nf-MnO(x)@CNTs possessed stronger reducing ability, more acid sites and stronger acid strength than the other two catalysts. Based on the above mentioned favourable properties, the nf-MnO(x)@CNT catalyst has an excellent performance in the low-temperature SCR of NO to N₂ with NH₃. In addition, the nf-MnO(x)@CNT catalyst also presented favourable stability and H₂O resistance.
Recent progress of low-temperature selective catalytic reduction of NO x with NH 3 over manganese oxide-based catalysts

Bo Qin,Jue Zhou,Rui-tang Guo,Lin-gang Wei,Tian-yi Yin,Wei-guo Pan

DOI: https://doi.org/10.1039/d1cp05557g

IF: 3.3

2022-01-01

Physical Chemistry Chemical Physics

Abstract:Low-temperature selective catalytic reduction of NO x with NH 3 over MnO x -based catalysts.

chemistry, physical,physics, atomic, molecular & chemical
Cobalt doped Fe-Mn@CNTs catalysts with highly stability for low-temperature selective catalytic reduction of NOx

Pengfei Li,Tiezhen Zhang,Haixiao Sun,Yufeng Gao,Yanyuan Zhang,Yuanyuan Liu,Chengmin Ge,Hao Chen,Xiaoping Dai,Xin Zhang

DOI: https://doi.org/10.1007/s12274-021-3932-8

IF: 9.9

2021-11-26

Nano Research

Abstract:In this paper, we report the fabrication of cobalt-doped de-NOx catalyst by pyrolyzing an analogous metal-organic framework-74 (MOF-74) containing Fe & Mn. The resulted catalyst exhibits distinctive microstructures of manganese, cobalt, and iron immobilized on N-doped carbon nanotubes (CNTs). It is found through experiments that the trimetallic catalyst Fe2Mn1Co0.5/CNTs-50 has the best NH3-selective catalytic reduction (SCR) performance. The Fe2Mn1Co0.5/CNTs-50 exhibited excellent water and sulfur resistance and good stability under the harsh gas environment of 250 °C and/or 170 °C, NO = NH3 = 1,000 ppm, 8 vol.% O2, 20 vol.% H2O, 1,000 ppm SO2, and gas hourly space velocity (GHSV) = 75,000 h−1. The de-NOx conversion was maintained about 55% and 25% after 192 h. The water and sulfur resistance performance were much higher than commercial vanadium series catalyst. The highly water and sulfur resistance performance may be attributed to the unique core-shell microstructure and the synergistic effect of manganese, cobalt, and iron which helps reduce the formation for byproducts (NH4HSO4). This study may promote to explore the development of a high stability catalyst for low-temperature selective catalytic reduction of NOx with NH3.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
MnOx-SnO2 Catalysts Synthesized by a Redox Coprecipitation Method for Selective Catalytic Reduction of NO by NH3

Tang Xingfu,Li Junhua,Wei Lisi,Hao Jimling

DOI: https://doi.org/10.1016/s1872-2067(08)60049-2

2008-01-01

Abstract:MnOx-SnO2 composite oxides prepared by a redox coprecipitation route were tested in selective catalytic reduction of NO by NH3 at low temperatures. The results showed that the MnOx-SnO2 catalyst with a Mn/(Mn+Sn) molar ratio of 75% exhibited the best performance, on which NO conversion of 100% could be achieved at temperatures of 120–200 °C. The characterization results of N2 adsorption-desorption, X-ray diffraction, and X-ray photoelectron spectroscopy indicated that the higher surface area, the formation of solid solution between manganese and tin oxides, and the high oxidation state manganese species were responsible for the high catalytic activity of the MnOx-SnO2 catalyst.
FeVO4-supported Mn-Ce Oxides for the Low-Temperature Selective Catalytic Reduction of NOx by NH3

Shuqi Zhao,Jian-Wen Shi,Cihang Niu,Baorui Wang,Chi He,Wei Liu,Lei Xiao,Dandan Ma,Hongkang Wang,Yonghong Cheng

DOI: https://doi.org/10.1039/d1cy01424b

IF: 6.177

2021-01-01

Catalysis Science & Technology

Abstract:Iron vanadate (FeVO4) nanorods are used as a carrier to support manganese (Mn) and cerium (Ce) oxides for the selective catalytic reduction (SCR) of nitrogen oxides (NOx) with NH3 for the first time.

Low-temperature Fe–MnO2 Nanotube Catalysts for the Selective Catalytic Reduction of NOx with NH3

Low-temperature Fe–MnO 2 nanotube catalysts for the selective catalytic reduction of NO x with NH 3

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Fe–Mn Mixed-Oxide Catalysts Containing Fe3Mn3O8 Phase

Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

Fe and Mn mixed oxide catalysts supported on Sn-modified TiO 2 for the selective catalytic reduction of NO with NH 3 at low temperature

Low-Temperature Reduction of NOx by NH3 with Unity Conversion on Nanofilament MnO2/Activated Semi-Coke Catalyst

Catalytic Reduction of NO_x over MnO_x Coated TiO_2 Nanotube Arrays

Catalytic Reduction of NO by NH3 over Fe–Cu–OX/CNTs-TiO2 Composites at Low Temperature

Catalytic Reduction of NOx with NH3 over Different-Shaped MnO2 at Low Temperature

CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Synthesis, Characterization and Catalytic Performance of Femntiox Mixed Oxides Catalyst Prepared by A Ctab-Assisted Process for Mid-Low Temperature Nh3-Scr

Selective catalytic reduction of NOX with ammonia over Mn–Ce–OX/TiO2-carbon nanotube composites

In situ synthesis of low-valence MnO/Mn 3 O 4 catalyst via carbon-acid hydrothermal strategy for NO removal

Cr–MnO Mixed-Oxide Catalysts for Selective Catalytic Reduction of NO with NH3 at Low Temperature

Highly dispersed MnO<sub>x</sub>–FeO<sub>x</sub> supported by silicalite-1 for the selective catalytic reduction of NO<sub>x</sub> with NH<sub>3</sub> at low temperatures

Low-temperature Selective Catalytic Reduction of NO with NH3 over Nanoflaky MnOx on Carbon Nanotubes in Situ Prepared Via a Chemical Bath Deposition Route

Recent progress of low-temperature selective catalytic reduction of NO x with NH 3 over manganese oxide-based catalysts

Cobalt doped Fe-Mn@CNTs catalysts with highly stability for low-temperature selective catalytic reduction of NOx

MnOx-SnO2 Catalysts Synthesized by a Redox Coprecipitation Method for Selective Catalytic Reduction of NO by NH3

FeVO4-supported Mn-Ce Oxides for the Low-Temperature Selective Catalytic Reduction of NOx by NH3