Abstract:Titanate nanotubes were synthesized hydrothermally from commercial TiO2 nanoparticles in the presence of NaOH; after calcination at 400°C, TiO2 nanotubes were obtained, which were used as the support to prepare manganese catalyst (MnOx/TiNT) by wet impregnation for the low-temperature selective catalytic reduction (SCR) of NO. The results of Brunauer, Emmett and Teller study, transmission electron microscopy, X-ray diffraction, and thermogravimetric measurements showed that TiO2 nanotubes exist in a well-defined TiO2 anatase phase after calcination at 400°C and that manganese particles are highly dispersed on the wall of TiO2 nanotubes. The effects of active-component loading, space velocity, oxygen content, [NH3]/[NO] ratio, and NO concentration on the SCR performance of MnOx/TiNT were investigated in a simulated flue gas. Under the reaction conditions of 150°C, [NH3]/[NO] of 1.2, [O2] of 3%, [NO] of 0.06%, gas hour space velocity of 23613.8 h−1, and Mn loading of 5–15%, NO conversion exceeds 95%. The catalyst is deactivated in the presence of H2O at 180°C, but its activity can be recovered almost completely by cutting off H2O. Moreover, higher resistance to H2O is observed at higher temperatures. The presence of SO2 can also deactivate the catalyst gradually; however, the catalyst shows better resistance to SO2 in the presence of H2O than in its absence. The SCR activity of the MnOx/TiNT catalyst that is deactivated by SO2 increases gradually after cutting off H2O and SO2 but cannot be restored to its initial level.

Catalytic Reduction of NOx with NH3 over Different-Shaped MnO2 at Low Temperature

Manganese Oxide Nanorod Catalysts for Low-Temperature Selective Catalytic Reduction of NO with NH3

Low-Temperature Reduction of NOx by NH3 with Unity Conversion on Nanofilament MnO2/Activated Semi-Coke Catalyst

Morphological Effects of Manganese Dioxide on Catalytic Reactions for Low-Temperature Nh3-Scr

Catalytic Reduction of NO_x over MnO_x Coated TiO_2 Nanotube Arrays

Low Temperature Selective Catalytic Reduction of NO over Manganese Supported on TiO2 Nanotubes

Selective catalytic reduction of NOx with NH3 by monolithic catalyst MnOx/AC/C under low temperature in the presence of excess O2

Low-Temperature Selective Catalytic Reduction of NO with NH3 over Mn2O3-Doped Fe2O3 Hexagonal Microsheets

Low-temperature Selective Catalytic Reduction of NO with NH3 over Nanoflaky MnOx on Carbon Nanotubes in Situ Prepared Via a Chemical Bath Deposition Route

Structure–performance relationships of MnO2 nanocatalyst for the low-temperature SCR removal of NOX under ammonia

Low-temperature NOx Selective Catalytic Reduction Activity Evaluation of Hollow-Spherical Manganese Oxides

Novel Mnox Catalyst for Low-Temperature Selective Catalytic Reduction of Nox with Nh3

MnOx Supported on Carbon Nanotubes by Different Methods for the SCR of NO with NH3

Low Temperature Selective Catalytic Reduction of NOx with NH3 over Amorphous MnOx Catalysts Prepared by Three Methods

Manganese Oxides Supported on Multi-Walled Carbon Nanotubes for Selective Catalytic Reduction of NO with NH3: Catalytic Activity and Characterization

Cr–MnO Mixed-Oxide Catalysts for Selective Catalytic Reduction of NO with NH3 at Low Temperature

Selective Catalytic Reduction of Nox with Nh3 on A Cr-Mn Mixed Oxide at Low Temperature

Origination of N2O from NO Reduction by NH3 over Β-Mno2 and Α-Mn2o3

Porous MnOx for Low-Temperature NH3-SCR of NOx: the Intrinsic Relationship Between Surface Physicochemical Property and Catalytic Activity

Low-temperature selective catalytic reduction of NO on MnOx/TiO2 prepared by different methods

Mn-Ce Oxide Nanoparticles Supported on Nitrogen-Doped Graphene for Low-Temperature Catalytic Reduction of NOx: De-Nitration Characteristics and Kinetics