Abstract:Highly dispersed CeO2 on carbon nanotubes (CNTs) is successfully prepared by a pyridine-thermal route for selective catalytic reduction (SCR) of NO with NH3. This catalyst is mainly characterized by the techniques of X-ray diffraction (XRD), transmission electron microscopy (TEM), temperature-programmed reduction by hydrogen (H-2-TPR), temperature-programmed desorption of ammonia (NH3-TPD) and X-ray photoelectron spectroscopy (XPS). The results of the XRD, TEM and TPR analysis show that the CeO2 particles on the CNTs are highly dispersed with a strong interaction between the particles and the CNTs. The NH3-TPD profiles indicate that this catalyst exhibits abundant strong acid sites. Furthermore, the O 1s XPS spectra show that the O-alpha/(O-alpha + O-beta) ratio of this catalyst is very high, which can result in more surface oxygen vacancies and therefore favor the NH3-SCR reaction. Compared with the catalysts prepared by impregnation or physical mixture methods, the catalyst prepared by the pyridine-thermal route presents the best NH3-SCR activity in the temperature range of 150-380 degrees C as well as favourable stability and good SO2 or H2O resistance. More than 90% of NO can be removed in the range of 250-370 degrees C with a desirable N-2 selectivity. Moreover, the NO conversion can be kept at about 97% with the presence of SO2 or H2O at 300 degrees C. In addition, this catalyst shows a high catalytic activity with a NO conversion remaining constant at ca. 98% during a 16 h continuous run duration at 300 degrees C. Highly dispersed CeO2 on the CNTs as well as the strong interaction between the particles and the CNTs, the large amounts of strong acid sites and the high O-alpha/(O-alpha + O-beta) ratio could be ascribed to the excellent NH3-SCR performance of the catalyst prepared by the pyridine-thermal route.

Low-temperature Selective Catalytic Reduction of NO with NH3 over Nanoflaky MnOx on Carbon Nanotubes in Situ Prepared Via a Chemical Bath Deposition Route

In Situ Supported Mnox-Ceox On Carbon Nanotubes For The Low-Temperature Selective Catalytic Reduction Of No With Nh3

Low Temperature Selective Catalytic Reduction of NO over Manganese Supported on TiO2 Nanotubes

MnOx-CeOx/CNTs pyridine-thermally prepared via a novel in situ deposition strategy for selective catalytic reduction of NO with NH3

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Low-Temperature Reduction of NOx by NH3 with Unity Conversion on Nanofilament MnO2/Activated Semi-Coke Catalyst

Manganese Oxide Nanorod Catalysts for Low-Temperature Selective Catalytic Reduction of NO with NH3

Catalytic Reduction of NOx with NH3 over Different-Shaped MnO2 at Low Temperature

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Manganese Oxide Catalysts Supported on Zinc Oxide Nanorod Arrays: A New Composite for Selective Catalytic Reduction of NOx with NH3 at Low Temperature

Flexible Ti Mesh-Supported MnO x –CuO x /TiO 2 Nanosheet Monolithic Catalysts for Low-Temperature Selective Catalytic Reduction of NO x with NH 3

Low-temperature selective catalytic reduction of NO with NH3 over Mn–Ce–Ox/TiO2: a comparison between catalyst preparation methods

Mn-Ce Oxide Nanoparticles Supported on Nitrogen-Doped Graphene for Low-Temperature Catalytic Reduction of NOx: De-Nitration Characteristics and Kinetics

In Situ Drifts Studies on Mnox Nanowires Supported by Activated Semi-Coke for Low Temperature Selective Catalytic Reduction of Nox with Nh3

Low-temperature SCR of NOx by NH3 over MnOx/SAPO-34 prepared by two different methods: a comparative study

Novel Mnox Catalyst for Low-Temperature Selective Catalytic Reduction of Nox with Nh3

Promotional Role of the TiO x Nanorod Arrays as a Support to Load MnO x for Low-Temperature NH 3 -Selective Catalytic Reduction of NO x : Comparison of Two Preparation Strategies

Highly Dispersed Ceo2 on Carbon Nanotubes for Selective Catalytic Reduction of No with Nh3

Effect of Preferential Exposure of Anatase TiO2 {0 0 1} Facets on the Performance of Mn-Ce/TiO2 Catalysts for Low-Temperature Selective Catalytic Reduction of NOx with NH3