Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

PREDICTION OF SUBCOOLED BOILING WITH UNCERTAINTIES FROM BOUNDARY CONDITIONS AND INTERACTION MODELS

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Investigation on the Effects of Model Uncertainties on Subcooled Boiling

Investigation on the Subcooled Boiling in Vertical Pipe with Uncertainties from Boundary Conditions by Using FLUENT

Uncertainty Analysis on K-Ε Turbulence Model in the Prediction of Subcooled Boiling in Vertical Pipes

Effect of Turbulence Model on Prediction of Subcooled Boiling

Application of rpi model : prediction of subcooled boiling and dnb in vertical pipes

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

A Calibrated Wall Boiling Model for the Numerical Simulation of Subcooled Flow Boiling on Hybrid Micro/Nanostructured Surfaces

Modeling Sensitivity in Prediction of Interfacial Area Concentration in Boiling Flow

Effects of Interaction Models on Upward Subcooled Boiling Flow in Annulus

Validation and Uncertainty Quantification for Wall Boiling Closure Relations in Multiphase-CFD Solver

Modeling of Low-Pressure Subcooled Boiling Flow of Water Via the Homogeneous MUSIG Approach

UNCERTAINTY ANALYSIS FOR NUMERICAL MODELING OF SURFACE HEAT TRANSFER CHARACTERISTICS IN EXPERIMENTS—APPLICATION TO POST-CHF FLOW BOILING TESTS

Parameter Sensitivity Analysis and Model Verification of Two-phase CFD Simulation in Nucleate Boiling

Evaluation of several liquid–vapor phase change models for numerical simulation of subcooled flow boiling

Effects of Turbulence Models on Forced Convection Subcooled Boiling in Vertical Pipe

Implementation and validation of two-phase boiling flow models in OpenFOAM

Numerical Simulation of Subcooled Boiling Water in Vertical Concentric Annulus under Low Pressure

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Numerical Study on a Semi-Mechanistic Wall Boiling Model Based on Dry-Patch Mechanism for CHF Prediction in Vertical Tube and Fuel Assembly