Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

A Mechanistic Model for Slightly Subcooled Flow Boiling in Vertical Tubes

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SATURATED FLOW BOILING IN VERTICAL CHANNELS

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

A Unifying Bubble-Layer-Based Theoretical Model for Flow Boiling and Application to a Rod Bundle

Experimental Investigation and Model Prediction of Sliding Bubble Dynamics in Vertical Subcooled Boiling Flow

Theoretical modeling of the boiling annular-mist flow in vertical channels

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

Development of subcooled wall boiling model considering bubble sliding in narrow rectangular channel

The Modeling of Bubble Lift-Off Diameter in Vertical Subcooled Boiling Flow

Simulation of Subcooled Flow Boiling in a Micro-Channel

Bubble Behaviors in Saturated Flow Boiling Based on the VOF Model

Modeling of Low-Pressure Subcooled Boiling Flow of Water Via the Homogeneous MUSIG Approach

A modified force balance model for predicting bubble departure diameter and lift-off diameter in subcooled flow boiling

NUMERICAL SIMULATIONS IN SUBCOOLED FLOW BOILING USING A TWO-WAY COUPLING EULERIAN-LAGRANGIAN MODEL

Flow Field Characteristics of Bubble Growth of Subcooled Flow Boiling in Vertical Narrow Rectangular Channel

ICONE19-43858 an Improved Critical Heat Flux Prediction Model for Subcooled and Low Quality Flow Boiling under Motion Condition Based on Microscopic Mechanism

Development and Assessment of Five-Component Wall Boiling Heat Flux Partitioning Model

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Numerical Simulation of Flow Boiling for Organic Fluid with High Saturation Temperature in Vertical Porous Coated Tube

Numerical Simulation of Subcooled Boiling Water in Vertical Concentric Annulus under Low Pressure