Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Modeling Sensitivity in Prediction of Interfacial Area Concentration in Boiling Flow

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Implementation and Validation of an Improved Interfacial Area Concentration Model for Two-Phase Flow CFD Simulations

Interfacial Area Transport of Subcooled Water–steam Condensing Bubbly Flow in Vertical Pipe

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

Interfacial Area Concentration Correlation for Bubbly Flows in Small-Diameter Pipes under Normal and Reduced Gravity Conditions

A Sensitivity Analysis of Bubble Departure Behavior in Vertical Channel Nucleate Boiling

Development of a modified thermal phase change model based on the interfacial area concentration determined by an interface reconstruction algorithm

The Evaluation of Interfacial Area Concentration Weighted Area-Averaged Gas Velocity Based on the Extended Drift-Flux Model

A Unifying Bubble-Layer-Based Theoretical Model for Flow Boiling and Application to a Rod Bundle

Predictive Modeling for Microchannel Flow Boiling Heat Transfer under the Dual Effect of Gravity and Surface Modification

Unified Two-Component Interfacial Area Concentration Model for Narrow Channel Two-Phase Flow

Effects of Interaction Models on Upward Subcooled Boiling Flow in Annulus

PREDICTION OF SUBCOOLED BOILING WITH UNCERTAINTIES FROM BOUNDARY CONDITIONS AND INTERACTION MODELS

Numerical Simulation of Two-Phase Flow Using Eulerian-Eulerian Model with One-Group Interfacial Area Transport Equation

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SATURATED FLOW BOILING IN VERTICAL CHANNELS

Critical Heat Flux Prediction Model for Low Quality Flow Boiling

Modeling of Low-Pressure Subcooled Boiling Flow of Water Via the Homogeneous MUSIG Approach

Prediction of Sliding Bubble Coalescence Rate During Subcooled Flow Boiling in Narrow Rectangular Channel

Assessment of the Force-Balance Model in Predicting the Bubble Departure Diameter in Inclined Channels