Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

A Sensitivity Analysis of Bubble Departure Behavior in Vertical Channel Nucleate Boiling

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

A Unified Relationship Between Bubble Departure Frequency and Diameter During Saturated Nucleate Pool Boiling

The Modeling of Bubble Lift-Off Diameter in Vertical Subcooled Boiling Flow

Experimental and Theoretical Study of Bubble Coalescence and Departure Behaviors During Nucleate Pool Boiling on Uniform Smooth and Micro-Pin-finned Surfaces under Different Subcoolings and Heat Fluxes

A comprehensive analysis of the gap size influence on boiling crisis in narrow rectangular channels

Numerical investigation of the bubble growth in horizontal rectangular microchannels

Numerical Simulation Research of Bubble Characteristics and Bubble Departure Diameter in Subcooled Flow Boiling

Modeling Sensitivity in Prediction of Interfacial Area Concentration in Boiling Flow

Modeling of Low-Pressure Subcooled Boiling Flow of Water Via the Homogeneous MUSIG Approach

Visual Experimental Study on Bubble Behavior from Nucleation Site in Vertical Rectangular Channel

Numerical Simulation and Experimental Observations of Confined Bubble Growth During Flow Boiling in a Microchannel with Rectangular Cross-Section of High Aspect Ratio

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

Experimental Research of Bubble Characteristics in Narrow Rectangular Channel under Heaving Motion

Assessment of the Force-Balance Model in Predicting the Bubble Departure Diameter in Inclined Channels

Visual Experimental Study on Bubble Characteristics Near the Heating Wall in Subcooled Flow Boiling

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SATURATED FLOW BOILING IN VERTICAL CHANNELS

Numerical Simulation of Subcooled Boiling Water in Vertical Concentric Annulus under Low Pressure

Experimental Investigation and Model Prediction of Sliding Bubble Dynamics in Vertical Subcooled Boiling Flow