Abstract:Previous studies have demonstrated that micro/nanostructured surfaces have great potential for heat transfer enhancement. However, simulating subcooled flow boiling on such surfaces is difficult owing to the lack of proper bubble characteristic parameter models, because most models used in flow boiling simulations were developed based on smooth surface conditions, which may limit their applications in engineering design. In this study, we improved upon one validated bubble characteristic parameter model suitable for subcooled flow boiling on smooth surfaces to adapt to the new hybrid micro/nanostructured surfaces proposed by Huang et al. [“Experimental investigation of a new hybrid structured surface for subcooled flow boiling heat transfer enhancement,” Appl. Therm. Eng. 192, 116929 (2021)]. The new bubble characteristic parameter model incorporates both basic correction terms to account for boiling bubble behaviors and ad hoc parameters to account for other unknown effects. Through sensitivity analysis and detailed calibration, the model was simplified to a set of correlations and only one constant parameter. With this improved model, subcooled flow boiling heat transfer simulations were conducted for three target surface specifications under conditions of 4–10 MW/m2 incident heat flux and 1–5 m/s flow velocity and the related heat-transfer mechanisms were further compared and discussed. The maximum error between the simulation and experimental results remains less than 3.5%, indicating that the established model has considerable accuracy in predicting the heat transfer performance for this type of micro/nanostructured surface in high-heat-flux engineering design applications. The heat transfer enhancement for subcooled flow boiling on this type of hybrid micro/nanostructured surface is greatly beneficial owing to its proper organization of convection, evaporation, and quenching heat transfer.

A Calibrated Wall Boiling Model for the Numerical Simulation of Subcooled Flow Boiling on Hybrid Micro/Nanostructured Surfaces

An improved wall boiling model for numerical simulation of subcooled flow boiling on a new hybrid micro/nanostructured surface

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

New correlation of the subcooled flow boiling heat transfer coefficient for hybrid micro/nanostructured surfaces with high heat flux incidence

Numerical Study on Bubble Behaviour and Heat Transfer Characteristics of Subcooled Pool Boiling Based on Non-Empirical Boiling and Condensation Model

Numerical Simulation on Critical Heat Flux of Downward-Facing Surface with Modified Wall Boiling Model

Development of a new semi-mechanistic wall boiling heat transfer model for CFD methodology focusing on macroscopic parameters

Micro-pin-finned Surfaces with Fractal Treelike Hydrophilic Networks for Flow Boiling Enhancement

Experimental investigation of a new hybrid structured surface for subcooled flow boiling heat transfer enhancement

Enhancement of Flow Boiling Heat Transfer in Microchannel Using Micro-Fin and Micro-Cavity Surfaces

Development and Assessment of Five-Component Wall Boiling Heat Flux Partitioning Model

Effects of Surface Wettability on Bubble Departure and Critical Heat Flux: A Parametric Study Based on 3-D Dynamic Force Analysis Model

Studies on the Subcooled Boiling in a Fuel Assembly with 5 by 5 Rods Using an Improved Wall Boiling Model

Numerical simulation of boiling behavior in vertical microchannels

Molecular dynamics investigation of the effect of nanostructured surfaces on flow boiling

Numerical Simulation of Bubble Growth and Heat Transfer During Flow Boiling in a Surface-Modified Microchannel

A wall heat transfer model for subcooled boiling flow

Heat Transfer Mechanism Investigation of Bubble Growth on the Superhydrophilic Nano-Structured Surface Using Moving Particle Semi-Implicit Method

Predictive Modeling for Microchannel Flow Boiling Heat Transfer under the Dual Effect of Gravity and Surface Modification

Enhancing the Critical Heat Flux Using Microchanneled Surfaces

Modeling and numerical investigation of hydrogen nucleate flow boiling heat transfer