Abstract:The use of carbon fiber-based composites in high-temperature environments has been hindered due to the inferior oxidation resistance of standard carbon fiber. Protective coatings comprised of refractory ceramics have served in enhancing the thermal endurance of carbon fiber significantly. Although zirconium and yttrium-based materials have been highly studied on their refractory characteristics, phosphate-based thermal barrier systems are scarce. Herein, we report the oxidation retardation capability of a B2O3-chemically anchored, Zr-3(PO4)(4)/YPO4 coating system on carbon fiber. In-situ, sol-gel-developed coatings with varying thicknesses and constructs were investigated for morphology, crystallography, composition, mechanical properties and thermal integrity. A uniquely consolidated B2O3 @Zr-3(PO4)(4)/YPO4 molecular arrangement was indicated in coatings by infra-red and X-ray spectroscopy. Ultimately, superior oxidation protection with an enhancement of similar to 180 degrees C over uncoated fiber was exhibited by the integrated nanocoatings, indicating its potential suitability for thermal shielding of carbon-based composites at temperatures in the range of 900-1000 degrees C. The exhibited improvement in thermal performance was attributed to the fortification provided by the coordinated B2O3 network on the fundamental Zr-3(PO4)(4)/YPO4 system.

Oxidation Protection Of Zrb2-Sic Modified Carbon-Bonded Carbon Fiber Composites

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

Multi-composition Coating for Oxidation Protection of Modified Carbon-Bonded Carbon Fiber Composites

ZrB2 particles reinforced glass coating for oxidation protection of carbon/carbon composites

A dense ZrB2-SiC-Si/SiC-Si coating to protect carbon/carbon composites against oxidation at 1773 K and 1973 K

Oxidation Protection of Carbon Fiber by Sol-Gel Derived Boron Doped Yttria Stabilized Zirconia Coatings

Combined Zr and Y Phosphate Coatings Reinforced with Chemically Anchored B2O3 for the Oxidation Inhibition of Carbon Fiber

High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

ZrSi2-SiC/SiC Anti-Oxidant Coatings Prepared on Graphite Spheres by Two-Step Pack Cementation Process

Oxidative protection of a carbon-bonded carbon fiber composite with double-layer coating of MoSi2-SiC whisker and TaSi2-MoSi2-SiC whisker by slurry method

Effect of Lu2O3 addition on the oxidation behavior of SiC-ZrB2 composite coating at 1500 °C: Experimental and theoretical study

Microstructure, Surface Emissivity and Ablation Resistance of Multilayer Coating for Lightweight and Porous Carbon–bonded Carbon Fiber Composites

Preparation of ZrB2-MoSi2 high oxygen resistant coating using nonequilibrium state powders by self-propagating high-temperature synthesis

A gradient composite coating to protect SiC-coated C/C composites against oxidation at mid and high temperature for long-life service

A Thick SiC-Si Coating Prepared by One-Step Pack Cementation for Long-Term Protection of Carbon/carbon Composites Against Oxidation at 1773 K

Oxygen barrier capability of ZrB2-SiC coating at 1700 °C strengthened by film-forming treatment

Microstructure and ablation behavior of double anti-oxidation protection for carbon-bonded carbon fiber composites

Preparation and anti-oxidation properties of Si(O)C coated carbon-bonded carbon fibre composites

An oxidation protective coating prepared by SiC densifying HfB2-SiC skeleton for SiC-coated C/C composites at 1473, 1773, and 1973 K

Effect of the ZrB2 content on the oxygen blocking ability of ZrB2-SiC coating at 1973K