Abstract:Inherent defect of easy oxidation limited further application of carbon fiber/phenolic resin composites in hostile environments. Herein, a combined strategy of matrix modification and fiber coating was proposed to fabricate a novel ceramizable composite containing Al-coated carbon fibers and Ti3SiC2 toward thermal protection materials (TPM), which offered a promising solution to challenge facing long-term thermal protection and load-bearing subject to severe oxidation corrosion and ablation in hypersonic vehicle applications. Oxidation resistance, mechanical strength evolution, phase evolution, microstructure evolution and mechanical strength failure mechanism at elevated temperatures were studied based on thermogravimetric analysis, static ablation test, mechanical test, X-ray diffraction analysis, and scanning electron microscopy coupled with energy dispersive X-ray analysis. The resulting composites exhibited outstanding oxidation resistance, with residue yield at 1600 °C and flexural strength at 1400 °C as high as 87.7% and 31.7 MPa, respectively. It was found that dense multiphase ceramics formed by reactions between Ti3SiC2, O2, pyrolytic carbon (PyC) and N2, acted as oxygen barriers and self-healing agents during static ablation. Besides, the resulting composites exhibited satisfactory ablation resistance and the linear ablation rate was as low as 0.00853 mm/s. Furthermore, ablation mechanisms were revealed based on phase identification, microstructure characterization and thermodynamic calculation analysis. It was revealed that multiphase ceramics composed of PyC, Al coatings, Ti3SiC2, TiC, Al2OC and AlB2 contributed great to the ablation resistance during oxyacetylene ablation.

Microstructure and ablation behavior of double anti-oxidation protection for carbon-bonded carbon fiber composites

Ablation Behaviors and Mechanism of Ultra‐thick Anti‐oxidation Layer Coating on Carbon‐bonded Carbon Fiber Composites

Ablation Behavior and Mechanism of Double-Layer ZrB2-based Ceramic Coating for Lightweight Carbon-Bonded Carbon Fiber Composites under Oxyacetylene Flame at Elevate Temperature

Microstructure, Surface Emissivity and Ablation Resistance of Multilayer Coating for Lightweight and Porous Carbon–bonded Carbon Fiber Composites

Multi-composition Coating for Oxidation Protection of Modified Carbon-Bonded Carbon Fiber Composites

Oxidative protection of a carbon-bonded carbon fiber composite with double-layer coating of MoSi2-SiC whisker and TaSi2-MoSi2-SiC whisker by slurry method

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites

Oxidative ablation behavior of W‐coated C/C composites prepared by CVD with heat‐treatment

Combined Zr and Y Phosphate Coatings Reinforced with Chemically Anchored B2O3 for the Oxidation Inhibition of Carbon Fiber

Carbon fiber reinforced ZrC based ultra-high temperature ceramic matrix composite subjected to laser ablation: Ablation resistance, microstructure and damage mechanism

Cr2AlC ceramic–modified carbon/quartz fiber composites with enhanced ablation resistance and thermal insulation

Ablation and mechanical behaviour of C/C composites under an oxyacetylene flame and tensile loading environment

Fabrication of low-density carbon-bonded carbon fiber composites with an Hf-based coating for high temperature applications

Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C

Achieving the synergy of superior damage tolerance and oxidation resistance of 2D Cf/ZrB2-SiC composites via fiber heat treatment

Ablation behaviors of ultra-high temperature ceramic composites

Oxidative Ablation Behavior of W‐Coated C/C Composites Prepared by Chemical Vapor Deposition with Heat Treatment

Advances in antioxidation coating materials for carbon/carbon composites

Effect of Mild Oxidation on Ablation Properties of ZrSiO4 Coating Prepared by Supersonic Atmospheric Plasma Spraying on Carbon/Carbon Composites

Oxidation behavior and ablation mechanism of Cf/ZrB2-SiC composite fabricated by vibration-assisted slurry impregnation combined with low-temperature hot pressing