Abstract:To heighten the oxidation inhibition capacity of HfB2-SiC coating, film-forming regulation of the self-formed compound layer was utilized to enhance the dynamic stability and the oxygen hindering capacity of the coating. The oxidation process of the HfB2-SiC coating in air from room temperature to 1700 °C can be divided into the lower temperature oxidation zone, the medium temperature protection zone and the high temperature corrosion zone. The oxidation activity of the coatings was significantly weakened in the medium temperature oxidation protection zone from 1100 °C to 1400 °C, which was selected as the film-forming regulation temperature region to ensure the lower film-forming wastage of the coatings. When the film-forming temperature was 1200 °C, the coating was uniformly covered by the glass layer with fewer defects. The values of active factor and inerting factor of the HfB2-SiC coating after film-forming at 1200 °C were 0.151 and 0.953 × 10−6 g cm−2 s−1, respectively, which show the lowest film-forming wastage of the coating. With further ascending the film-forming temperature, a large number of pores and cracks generated on the glass layer owing to the evaporation and release of the gaseous byproducts, which destroyed the structure of the glass layer and aggravated the oxidation wastage of the coating. With increasing the film-forming time at 1200 °C for 360 min, the protection efficiency of the HfB2-SiC coating increased to 99.13%, the oxygen permeability and carbon loss rate decreased by 79.6% and 67.8%, respectively, which slowed down the oxidation activity and improved the dynamic stability of the coating during oxidation.

Oxygen barrier capability of ZrB2-SiC coating at 1700 °C strengthened by film-forming treatment

Effect of the ZrB2 content on the oxygen blocking ability of ZrB2-SiC coating at 1973K

Enhanced oxidation resistance of HfB2‐SiC‐ZrSi2 coating at 1700°C through low‐loss film‐forming treatment

Effect of film-forming regulation of the self-formed compound layer on the oxidation inhibition capacity of HfB2-SiC coating

ZrB2 particles reinforced glass coating for oxidation protection of carbon/carbon composites

A dense ZrB2-SiC-Si/SiC-Si coating to protect carbon/carbon composites against oxidation at 1773 K and 1973 K

Oxidation inhibition behaviors of the HfB2-SiC-TaSi2 coating for carbon structural materials at 1700 °C

Preparation of oxidation protective ZrB 2 –SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites

Effect of boronizing treatment on the oxidation resistance of Zr2(AlSi)4C5/SiC composite

Oxidation Protection and Behavior of In-Situ Zirconium Diboride–silicon Carbide Coating for Carbon/carbon Composites

Oxidation Protection Of Zrb2-Sic Modified Carbon-Bonded Carbon Fiber Composites

Oxidation Behavior of ZrC-based Composites in Static Laboratory Air Up to 1300 °C

High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites

Preparation of ZrB2-MoSi2 high oxygen resistant coating using nonequilibrium state powders by self-propagating high-temperature synthesis

Oxidation Resistance Behavior of Short Carbon Fiber Reinforced ZrB2,-SiC Composites

Oxidation Resistance Performance of ZrB_2-SiC Ceramic Matrix Composites

Effect of silicon/graphite ratio and temperature on oxidation protective properties of SiC/ZrB2–SiC coatings prepared by pack cementation

(Zrb2–sic)/sic Oxidation Protective Coatings for Graphite Materials

Isothermal Oxidation of Zr2[Al(Si)]4C5–SiC Composites at 1000–1300°C in Air

Thermal Protection and Dielectric Properties of Borosilicate Coatings for SiCf/SiC Composites Under High-Temperature Oxidation

Research on Microstructure and Oxidation Resistant Property of ZrSi2-SiC/SiC Coating on HTR Graphite Spheres