Abstract:To better understand whether the SiC layer can withstand the corrosion given by the chemical reaction between SiC and O-2, our experiments focused mainly on the effect of oxygen on SiC-coated fuel particles at high temperature. Tests were conducted on non-irradiated coated fuel particles in an atmosphere of air over a range of temperatures between 800 and 1600 degrees C.This paper summarizes the failure fractions, surface morphology and microstructure of the SiC coating, etc. The morphology of SiC-coated particles surfaces, optical and scanning electron micrographs and the oxygen distribution of polished SiC layers at 800, 1000 and 1200 degrees C for 200 h under air atmosphere showed that the features of SiC layers did not change in these cases. In contrast with the aforementioned cases, the behavior of SiC layers was deteriorated when the oxidation temperature was beyond 1400 degrees C. More serious the deterioration, higher the oxidation temperature is. The thickness of SiO2 layer from outside to inside SiC layers reached 6 similar to 8 mu m, and a large number of SiC-coated particles were broken into fragment at 1600 degrees C. The experiment results show that the oxidation of the SiC layer proceeds slowly at temperatures around 1400 degrees C and more rapidly as the temperature approaches 1600 degrees C. (C) 2013 Elsevier B.V. All rights reserved.

Oxidation Behaviors of C–ZrB2–SiC Composite at 2100 °C in Air and O2

Isothermal Oxidation of Zr2[Al(Si)]4C5–SiC Composites at 1000–1300°C in Air

Oxidation of Short Carbon Fiber Reinforced Zrb2-Sic Ceramics under Atmospheric and Oxyacetylene Torch Conditions

Effect of Lu2O3 addition on the oxidation behavior of SiC-ZrB2 composite coating at 1500 °C: Experimental and theoretical study

Oxidation Behavior of SiC/SiC Composites in Air at High Temperature

Long‐term oxidation and ablation behavior of Cf/ZrB2–SiC composites at 1500, 2000, and 2200°C

Effect of silicon/graphite ratio and temperature on oxidation protective properties of SiC/ZrB2–SiC coatings prepared by pack cementation

Oxidation behavior of 3D SiCf/SiBCN composites at 800–1200 °C

Effect of boronizing treatment on the oxidation resistance of Zr2(AlSi)4C5/SiC composite

Enhanced Oxidation Resistance of ZrB2‐SiC‐WC Composite Below 1800 °C

Comparison of Oxidation Behaviors of 3D C/PyC/SiC and SiC/PyC/SiC Composites in an O2-Ar Atmosphere

Stress‐Oxidation Behavior of a Carbon/Silicon Carbide Composite in a High‐Temperature Combustion Environment

In Situ Synthesis, Mechanical Properties, and Oxidation Resistance of (sic+zrb2)/zr3[al(si)]4c6 Composites

Study on the oxidation mechanism of Al-SiC composite at elevated temperature

Oxidation behavior and kinetics of (Zr, Ti)(C, N)–SiC ceramics with enhanced oxidation resistance at 850 °C–950 °C

SiC Performance of Coated Fuel Particles under High-Temperature Atmosphere of Air

High-Temperature Oxidation Resistance of ZrB2-SiC Ceramic Composites Prepared by Reactive Hot Pressing

High-temperature Diffusion Behavior of ZrC in C Matrix and Its Promotion on Graphitization

A dense ZrB2-SiC-Si/SiC-Si coating to protect carbon/carbon composites against oxidation at 1773 K and 1973 K

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

ZrSi2-SiC/SiC Anti-Oxidant Coatings Prepared on Graphite Spheres by Two-Step Pack Cementation Process