Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

Synthesis And Characterization Of La0.75sr0.25mn0.5cr0.5-Xcuxo3-Delta For Sofc Anode Material

Synthesis and characterization of La0.75Sr0.25Mn0.5Cr0.5-x CuxO3-δ for SOFC anode material

Synthesis and Characterization of La_(0.75)Sr_(0.25)Mn_(0.5)Cr_(0.5-x)Cu_xO_(3-δ) for SOFC Anode Material

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

New Electrode of La<sub>0.75</sub>Sr<sub>0.25</sub>Mn<sub>0.5</sub>Cr<sub>0.5-X</sub>Cu<sub>x</sub>O<sub>3-δ</sub> (x=0, 0.05, 0.10, 0.20) for Symmetric Solid Oxide Fuel Cell

Cobalt-free Sr0.7Y0.3CuO2+δ As a Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

La0.4sr0.6co0.2fe0.7nb0.1o3-Delta Electrodes for Ysz-Based Symmetrical Sofc

Development of Lsm-Based Cathodes for Solid Oxide Fuel Cells Based on Ysz Films

Synthesis and characterization of Ca doped LaMnO3 as potential anode material for solid oxide electrolysis cells

Molybdenum-based Double Perovskites A2CrMoO6− (A = Ca, Sr, Ba) As Anode Materials for Solid Oxide Fuel Cells

Properties of nonstoichiometric Pr0.6-xSr0.4MnO3 as the cathodes of SOFCs

Electrochemical Characteristics of Solid Oxide Fuel Cell Cathodes Prepared by Infiltrating (la,sr)mno3 Nanoparticles into Yttria-Stabilized Bismuth Oxide Backbones

Preparation and electrochemical characterization of Sr- and Mn-doped LaGaO 3 as anode materials for LSGM-based SOFCs

La 3+-Substituted Sr2Fe1.5Ni0.1Mo0.4O6-δ As Anodes for Solid Oxide Fuel Cells

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Investigation of structural, electrical and electrochemical properties of La0.8Sr0.2Mn1−xScxO3−δ as cathode on yttria-stabilized zirconia electrolyte for intermediate temperature solid oxide fuel cell fabricated by one step dry pressing method

Study on the Cathodes Material La 1- X Sr X MnO 3 for SOFC

A Cobalt-Free Electrode Material La0.5Sr0.5Fe0.8Cu0.2O3 − Δ for Symmetrical Solid Oxide Fuel Cells

Synthesis and Properties of Pr1-Xsralo3-Delta As Cathode of Solid Oxide Fuel Cells

Fabrication and performance of membrane solid oxide fuel cells with La0.75Sr0.25Cr0.5Mn0.5O3-δ impregnated anodes

Performance of the Single-Chamber Solid Oxide Fuel Cell with a La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta)-Based Perovskite Anode