Abstract:The system Y 1−x Sr x MnO 3 (x = 0.000, 0.005, 0.010, 0.050, and 0.100) was studied as a potential cathode material for solid oxide fuel cells. Powders were prepared using an organometallic precursor; however, achieving homogeneous compositions was complicated due to the presence of intermediate, metastable phases. The desired hexagonal Y 1−x Sr x MnO 3 phase formed from the precursor at 800 °C, while small amounts of a metastable orthorhombic (Y,Sr)MnO 3 phase formed in the temperature range between 850°and 960 °C, and another orthorhombic YMn 2 O 5 phase between 840°and 1200 °C. The metastable (Y, Sr)MnO 3 phase readily transformed into the stable hexagonal phase at about 960 °C. The other metastable intermediate phase, YMn 2 O 5 , was formed as a decomposition product of a portion of the major hexagonal YMnO 3 at 840 °C, and subsequently reacted with Y 2 O 3 back to the hexagonal YMnO 3 at 1200 °C. For the studied compositions, densities higher than 95% theoretical could be obtained by sintering in air at temperatures above 1400 °C for 2 h. The investigated system was comparable in electrical conductivity with the current cathode material La 1−x Sr x MnO 3 , and had an average apparent thermal expansion coefficient between 5 and 7 ppm/°C in the temperature range between 200°and 1000 °C. Unfortunately microcracking was observed in all sintered specimens, possibly caused by a high-temperature phase transition between the hexagonal and cubic polymorphs of Y 1−x Sr x MnO 3 . The microcracking presents a major obstacle to the use of this material as a cathode in solid oxide fuel cells.

Study on the Cathodes Material La 1- X Sr X MnO 3 for SOFC

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Preparation and Properties of Cathode Materials for SOFC

Properties of nonstoichiometric Pr0.6-xSr0.4MnO3 as the cathodes of SOFCs

Electrode redox properties of Ba 1−x La x FeO 3−δ as cobalt free cathode materials for intermediate-temperature SOFCs

Cobalt-free Sr0.7Y0.3CuO2+δ As a Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

Investigation of structural, electrical and electrochemical properties of La0.8Sr0.2Mn1−xScxO3−δ as cathode on yttria-stabilized zirconia electrolyte for intermediate temperature solid oxide fuel cell fabricated by one step dry pressing method

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Preparation and characterization of La1−xSrxNiyFe1−yO3−δ cathodes for low-temperature solid oxide fuel cells

Single crystalline La0.5Sr0.5MnO3 microcubes as cathode of solid oxide fuel cell

Fabrication and Performance of La, Co-Substituted SrTiO3 As Cathode Materials of Solid Oxide Fuel Cell

Investigation of structural, electrical and electrochemical properties of La0.6Sr0.4Fe0.8Mn0.2O3-δ as an intermediate temperature solid oxide fuel cell cathode

Synthesis And Characterization Of La0.75sr0.25mn0.5cr0.5-Xcuxo3-Delta For Sofc Anode Material

Enhancing ORR Catalytic Activity and Electrochemical Investigation of La1−2xBaxBixFeO3 Cathode for Low-Temperature Solid Oxide Fuel Cell

Synthesis and characterization of La0.75Sr0.25Mn0.5Cr0.5-x CuxO3-δ for SOFC anode material

Solid State Reactive Mechanism of La1-xSrxMnO3

New Electrode of La<sub>0.75</sub>Sr<sub>0.25</sub>Mn<sub>0.5</sub>Cr<sub>0.5-X</sub>Cu<sub>x</sub>O<sub>3-δ</sub> (x=0, 0.05, 0.10, 0.20) for Symmetric Solid Oxide Fuel Cell

Synthesis and Characterization of SmSrCo2−xMnxO5+δ (x=0.0, 0.2, 0.4, 0.6, 0.8, 1.0) Cathode Materials for Intermediate-Temperature Solid-Oxide Fuel Cells

Structural properties and electrical conductivity of perovskite-type oxides in SOFCs

Synthesis and properties of strontium-doped yttrium manganite

Synthesis and electrochemical properties of (Pr-Nd)1-ySryMnO3-δ and (Pr1-xNdx)0.7Sr0.3MnO3-δ as cathode materials for IT-SOFC