Abstract:TiO2-doped HfO2 gate dielectric thin films have been deposited on Si(100) substrates by RF sputtering. The component, morphology, structure, optical and interfacial properties of Hf-1 xTixO2 films related to TiO2 concentration are systematically investigated by atomic force microscope (AFM), X-ray diffraction (XRD), spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), and Fourier transformation infrared (FTIR). By employing Cauchy-Urbach model, the optical constants, such as refractive index (n), extinction coefficient (k), absorption coefficient (alpha), and optical band gap (E-g) have been determined precisely. Measurements from XRD have confirmed that TiO2 incorporating into HfO2 films leads to the increase of the crystallization temperature of HfO2 films with increasing the TiO2 concentration. SE analyses have indicated that reduction in band gap and refractive index has been observed with increasing the TiO2 component in Hf-1 xTixO2 films. The increase in Urbach parameter E-U with the increase of TiO2 concentration also suggests the rise in disorder for Hf-1 xTixO2 films. FTIR measurements for Hf-1 xTixO2/Si gate stack indicate the existence of the interfacial layer regardless of the TiO2 concentration. For the 9% TiO2-doped HfO2 samples, the shift in FTIR characteristic peak suggests the formation of the silicate layer, which leads to the suppressed interfacial layer growth during deposition. As a result, it can be conclude that the TiO2 component in Hf-1 xTixO2 films should be controlled precisely to guarantee interfacial properties of Hf-1 xTixO2/Si gate stacks. (C) 2014 Elsevier B.V. All rights reserved.

Optimization of Plasma Etching of Sio2 As Hard Mask for Hgcdte Dry Etching

Low-Roughness Plasma Etching of HgCdTe Masked with Patterned Silicon Dioxide

Study on Mask Technology of HgCdTe Etched by Inductively Coupled Plasma Dry Etching

A Study Of Hg1-Xcdxte Surfaces Processed Using Inductively Coupled Plasma With Ch4/H-2/N-2/Ar Mixture

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Step Coverage and Dry Etching Process Improvement of Amorphous Carbon Hard Mask

A Junction-Level Optoelectronic Characterization of Etching-Induced Damage for Third-Generation HgCdTe Infrared Focal-Plane Array Photodetectors

Optimization of (100)-Si TMAH Etching for Uncooled Infrared Detector

Microscale pattern etch of 4H–SiC by inductively coupled plasma

The study on saturation current and ideality factor of CdTe solar cell based on CdS window layer deposited with hydrogen peroxide

Smooth and Vertical Etching of GaAs/GaInP/AlGaInP Using Inductively Coupled Cl2/BCl3/CH4 Plasma

28nm Metal Hard Mask etch process development

The study and optimization of ICP deep etching at a low-temperature for InP solid-immersion metalens fabrication

HgCdTe surface passivation with low-temperature plasma-enhanced atomic layer deposited HfO 2

The Study on the Profile of HgCdTe Micro-mesa Arrays Isolated by Dry-etch Process

A Hard Mask Process and Alignment Device Aims to Achieve High Consistency and Mass-Scale Production of Gas Sensors Based on Spraying Hydrothermal Gas Sensing Material.

A Study on Etch Rate of Dry Technique for HgCdTe IRFPAs

Progress In The Cdznte Single Crystal Growth And Substrates Fabrication

Fabrication and study on the HgCdTe MIS device of CdTe+ZnS double insulator films

Wafer level bulk titanium ICP etching using SU8 as an etching mask

High Aspect Ratio Carbon Hard Mask Etch Process for Profile and LCDU Control