Abstract:TiO2-doped HfO2 gate dielectric thin films have been deposited on Si(100) substrates by RF sputtering. The component, morphology, structure, optical and interfacial properties of Hf-1 xTixO2 films related to TiO2 concentration are systematically investigated by atomic force microscope (AFM), X-ray diffraction (XRD), spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), and Fourier transformation infrared (FTIR). By employing Cauchy-Urbach model, the optical constants, such as refractive index (n), extinction coefficient (k), absorption coefficient (alpha), and optical band gap (E-g) have been determined precisely. Measurements from XRD have confirmed that TiO2 incorporating into HfO2 films leads to the increase of the crystallization temperature of HfO2 films with increasing the TiO2 concentration. SE analyses have indicated that reduction in band gap and refractive index has been observed with increasing the TiO2 component in Hf-1 xTixO2 films. The increase in Urbach parameter E-U with the increase of TiO2 concentration also suggests the rise in disorder for Hf-1 xTixO2 films. FTIR measurements for Hf-1 xTixO2/Si gate stack indicate the existence of the interfacial layer regardless of the TiO2 concentration. For the 9% TiO2-doped HfO2 samples, the shift in FTIR characteristic peak suggests the formation of the silicate layer, which leads to the suppressed interfacial layer growth during deposition. As a result, it can be conclude that the TiO2 component in Hf-1 xTixO2 films should be controlled precisely to guarantee interfacial properties of Hf-1 xTixO2/Si gate stacks. (C) 2014 Elsevier B.V. All rights reserved.

Optimization of (100)-Si TMAH Etching for Uncooled Infrared Detector

Determination Of Refractive Indices And Thicknesses Of Ba0.7sr0.3tio3 Films With And Without Mgo (001) Buffer Layer On Silicon Substrate

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Optimization Of Crystal Surface Treatment For A Double Layer Depth Of Interaction Detector

Tailoring the interface assembly of mesoporous TiO2 on BTO film toward high performance UV photodetectors

In-situ diagnosis during preparation of SiO_x thin films by mass spectroscopy and their characteristics

Thermo-Sensitive Ba 0.64 Sr 0.36 TiO 3 Thin Film Capacitors for Dielectric Type Uncooled Infrared Sensors

Thermo-Sensitive Ba<sub>0.64</sub>Sr<sub>0.36</sub>TiO<sub>3</sub> Thin Film Capacitors for Dielectric Type Uncooled Infrared Sensors

Optimization Design of Uncooled Amorphous Silicon Thin Film Transistor Infrared Detector

The Influence of Surface Treatment on the Performance of Photoconductive Detectors Based on Silicon Wafer

Solvent Engineering of MAPbI3 Perovskite Thick Film for a Direct X-ray Detector

Effect of additives on the anisotropic etching of silicon by using a TMAH based solution

Preparation and characterization of crystalline Ba0.5Sr0.5TiO3 thin films on FTO transparent electrodes

Process Optimization and Performance Improvement of CMOS Microbolometer with A Salicided Polysilicon Thermistor

Optimization of the GaAs-on-Si Substrate for Microelectromechanical Systems (MEMS) Sensor Application

Study of under Etching Characters of Si (100) in Surfactant Added Tmah

Preparation of (1− x %)(Na 0.5 Bi 0.5 )TiO 3 – x %SrTiO 3 thin films by a sol–gel method for dielectric tunable applications

Preparation of (1− <i>x</i> %)(Na<sub>0.5</sub>Bi<sub>0.5</sub>)TiO<sub>3</sub>– <i>x</i> %SrTiO<sub>3</sub> thin films by a sol–gel method for dielectric tunable applications

Monolithic Dielectric BST Infrared Sensor Arrays Using a Novel Silicon-Ferroelectric Integration Scheme Based on Improved Porous Silicon Micromachining

BST Thin Film Deposited on Glass Substrate with TISI Nanowire Electrode by RF-Sputtering Method

A Uncooled A-Si Infrared Detector with Novel Thermal Isolation Method.