Abstract:This work presents the influence of O 2 during the cooling stage (CS) after the deposition of the CdTe absorber layer on the photovoltaic parameters of CdTe/PEDOT:PSS hybrid solar cells. The CdTe samples were processed by closed space sublimation (CSS) at a constant deposition pressure of 100 mTorr under 50 %Ar + 50 %O 2 atmosphere. After CdTe deposition, the CSS system remained at a constant pressure of 50 mTorr for 10 min of the CS under different Ar+O 2 atmospheres and in vacuum, in order to study the influence of the cooling atmosphere on the optical, morphological and structural properties of CdTe and on the photovoltaic parameters of the CdTe/PEDOT:PSS hybrid solar cells. In addition, different cooling times (from 10 to 90 min) were studied in an O 2 -only atmosphere, when the cooling temperature decreased from 500 to 300°C inside the CSS system, at the same pressure. SEM micrographs showed changes in the surface morphology of CdTe when cooled in O 2 atmosphere; while, EDS showed a slight modification in Te/Cd ratio for some samples with O 2 during CS. Carrying out a cooling process in O 2 atmosphere for 10 min allows improving the photovoltaic parameters J sc , V oc , FF, and η of the obtained hybrid solar cells. For cooling times longer than 30 min, the values of V oc and J sc started to decrease. The solar cells with cooling times of 10 and 30 min in an O 2 atmosphere show in the J vs. V curves an increase mainly in the V oc , FF and shunt resistances associated with the mitigation of defects at the interfaces and inside the materials, which may be due to a passivation of the absorber material. Solar cells with an O 2 cooling atmosphere also show an essential increase in the EQE response.

The study on saturation current and ideality factor of CdTe solar cell based on CdS window layer deposited with hydrogen peroxide

The role of O2 in CdSeTe thin film deposition and CdSeTe/CdTe solar cell performance

Improving CdTe‐Based Thin‐Film Solar Cell Efficiency with the Oxygenated CdSe Layer Prepared by Sputtering Process

The Influence of CdS Intermediate Layer on CdSe/CdS Co-Sensitized Free-Standing TiO2 Nanotube Solar Cells

Strategy for Performance Enhancement of Cd1-XZnXTe/CdS Core/shell Quantum Dot Sensitized Solar Cells Through Band Adjustment

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

Physico-chemical analysis of the properties and stability of CdS and CdS:O to be applied in thin-film solar cells

Study on the Aqueous CdTe Quantum Dots Solar Device Deposited by Blade Coating on Magnesium Zinc Oxide Window Layer

Improving the structural and optical properties of CdS films grown by Chemical Bath Deposition with adding H 2 O 2

The Design of Mn2+&Co2+ Co-Doped CdTe Quantum Dot Sensitized Solar Cells with Much Higher Efficiency.

An Optimized Multilayer Structure of CdS Layer for CdTe Solar Cells Application

CdTe thin film solar cells with a SnTe buffer layer in back contact

Effects of Oxidation and CdCl2 Treatment on the Electronic Properties of CdTe Polycrystalline Films

Improved photovoltaic parameters of CdTe/PEDOT:PSS solar cells by CSS through their cooling in an O 2 atmosphere

Research progress in doped absorber layer of CdTe solar cells

Performance Improvement of Solution-Processed CdS/CdTe Solar Cells with a Thin Compact TiO2 Buffer Layer

Several Efficiency Influencing Factors in CdTe/CdS Solar Cells

Optimizing the Band Alignment of the MZO/CdSeTe/CdTe Solar Cell by Varying the Substrate Temperature of MZO Film

Reduced Recombination Current Due to Sputtered CdO Nanolayer at CdS/CdTe Interface

A microstructural study on the surface and interface of CdTe/CdS solar cells

Oxygen Content Modulation Toward Highly Efficient Sb2Se3 Solar Cells