Abstract:This work presents research results concerning to the fabrication of hybrid solar cells in a superstrate configuration with the following structure: glass/SnO 2 :F/ZnO + CdS/CdTe + CdCl 2 -TT/PEDOT:PSS-TT/Cu-Mo. After Cadmium Telluride (CdTe) absorber layer processing, the organic conjugated polymer Poly(3,4-ethylenedioxythiophene): poly(styrene sulphonate) (PEDOT:PSS) was deposited with a thickness around 50 nm, then a thermal annealing (TA) was carried out varying annealing time (20-40 min) and temperature (80-120 °C). The physical properties and output electrical parameters of the devices were measured and compared with a reference solar cells without TA. A decrease of the resistivity values was reached as a result of the incorporation of PEDOT:PSS on CdTe as a hole transport layer. CdTe/PEDOT:PSS structure was characterized by profilometry, four-probe method, UV–Vis spectroscopy, Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS) and Raman spectroscopy. The electrical performance of the fabricated hybrid solar cells was analysed through the current density vs. voltage (J vs. V) characteristic, External Quantum Efficiency (EQE) measurements and the values spread distribution for each electrical parameter was also discussed. A highest conversion efficiency around 15.2% was obtained for a device in which the TA was performed at 100 °C during 30 min with output electrical parameters values of V oc ~ 0.778 V, J sc ~ 34.0 mA/cm 2 , FF ~ 0.55 and EQE values above 55%, resulting this in an improvement of the use of PEDOT:PSS in hybrid solar cells. A monitoring of the degradation effect of the output electrical values was carried out after a period of 24 months and an average degradation rate around 20% was found, however for devices processed at higher temperatures of TA, degradation rate of the conversion efficiency was at least 3%.

Improved photovoltaic parameters of CdTe/PEDOT:PSS solar cells by CSS through their cooling in an O 2 atmosphere

The role of O2 in CdSeTe thin film deposition and CdSeTe/CdTe solar cell performance

The study on saturation current and ideality factor of CdTe solar cell based on CdS window layer deposited with hydrogen peroxide

Improving CdTe‐Based Thin‐Film Solar Cell Efficiency with the Oxygenated CdSe Layer Prepared by Sputtering Process

Investigation of the effects of thermal annealing to PEDOT:PSS on the photovoltaic response of hybrid solar cells

Physico-chemical analysis of the properties and stability of CdS and CdS:O to be applied in thin-film solar cells

Effects of Oxidation and CdCl2 Treatment on the Electronic Properties of CdTe Polycrystalline Films

Annealing Effects on the Chemical Deposited Cds Films and the Electrical Properties of Cds/Cdte Solar Cells

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

The Role of Oxygen Exposure on the Performance of All-Vapor-Processed Perovskite Solar Cells With CuPC Hole Transport Layers

Effect of oxidized CdO quantum dots doped TiO2 electron transport layer on performance of mesoporous perovskite solar cells

Performance Improvement of Solution-Processed CdS/CdTe Solar Cells with a Thin Compact TiO2 Buffer Layer

Influence of deposition time in CdTe thin film properties grown by Close-Spaced Sublimation (CSS) for photovoltaic application

An Optimized Multilayer Structure of CdS Layer for CdTe Solar Cells Application

Properties of CdTe layers deposited by a novel method -Pulsed Plasma Deposition

Improved Interfacial Contact between "Perovskite/Electron‐Transport‐Layer" by Hydrophilic Molecule to Achieve Efficiency > 14%, Carbon‐electrode Basing, Hole‐Conductor‐Free, Low‐temperature Mesoscopic Perovskite Solar Cells

Defect engineering of oxygen vacancies in SnOx electron transporting layer for perovskite solar cells

Oxygen doping of P3HT:PCBM blends: Influence on trap states, charge carrier mobility and solar cell performance

Optimization and effect of UV-ozone exposure of electron transport layer on the efficiency of the dye-sensitized solar cells

Enhancing the Efficiency of Tio2-Perovskite Heterojunction Solar Cell Via Evaporating Cs2co3 on Tio2

Oxygen-Mediated (0D) Cs 4 PbX 6 Formation during Open-Air Thermal Processing Improves Inorganic Perovskite Solar Cell Performance