Abstract:The three-dimensional grain-averaged response of solid bar samples under non-proportional (NP) elastoplastic axial-torsional loading was investigated using in situ high energy diffraction microscopy (HEDM) and companion crystal plasticity finite element (CPFE) modeling. Important stress metrics including applied shear (σ θZ ) and axial (σ ZZ ) stress tensor components, stress and stress deviator tensor invariants (I 1 , J 2 , and J 3 ), von Mises equivalent stress (), maximum resolved shear stress (mRSS), stress triaxiality (η), and lode angle parameter () values were tracked for ∼ 300 grains under two different loading conditions: (1) Torsion-dominated loading (low NP) and (2) Tension-torsion loading (high NP) in equiatomic NiCoCr, a representative multicomponent face-centered cubic (FCC) superalloy. Overall, significant stress localizations existed within both samples as evidenced by the radial dependence of grain-resolved σ θZ , , and J 2 ; by comparison, I 1 , J 3 , η, and metrics did not show discernable trends within the volume. These stress localizations reveal a complex interplay between axial and shear stress components (e.g., stress coupling) resulting in grain yielding near the sample surface largely driven by shear stress, whereas internal grain yielding was largely accommodated by axial stress. Grain-resolved stress localization trends were described well by the CPFE model, although some discrepancies in magnitude occurred, particularly for volumetric stress metrics (I 1 and η) due to initial type II residual stress distributions. The superposition of initial residual stress states onto CPFE grain-resolved data significantly improved model accuracy for η. This suggests that residual stresses more strongly influence the simulation of volumetric rather than deviatoric (yield) stress metrics.

Local Residual Stress in Partially Recrystallized Iron Characterized Using High Resolution Electron Backscatter Diffraction

Quantitative Study of Residual Strain and Geometrically Necessary Dislocation Density Using HR-EBSD Method

Synchrotron Measurements of Local Microstructure and Residual Strains in Ductile Cast Iron

Residual Stress of Individual Aluminum Grains from Three Dimensional X-Ray Diffraction

HR-EBSD analysis of in situ stable crack growth at the micron scale

Prediction of Static Recrystallization Nucleation Sites in Tensile Deformed Single Crystal Pure Iron through a Combination of In-Situ EBSD and CP-FEM

Neutron diffraction methods for the study of residual stress fields

X-ray Diffraction for the Determination of Residual Stress of Crystalline Material: An Overview

Characterization and Influence of Deformation Microstructure Heterogeneity on Recrystallization

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Heterogeneous local plastic deformation of interstitial free steel revealed using in-situ tensile testing and high angular resolution electron backscatter diffraction

Recrystallization phenomena in an IF steel observed by in situ EBSD experiments

In situ measurement of three-dimensional intergranular stress localizations and grain yielding under elastoplastic axial-torsional loading

Diffraction-Based Multiscale Residual Strain Measurements

The evolution of local stress during deformation twinning in a Mg-Gd-Y-Zn alloy

Multiscale in-situ characterization of static recrystallization using dark-field X-ray microscopy and high-resolution X-ray diffraction

An iterative method for reference pattern selection in high resolution electron backscatter diffraction (HR-EBSD)

High-resolution reconstruction-based investigation of multi-scale lamellar microstructures by coupled crystal plasticity and in-situ experiment

In Situ Observations and Microstructure Evolution Behavior of Static Recrystallization of Microalloyed Continuous Casting Slabs in a Solidification End Reduction Process

Adaptive characterization of recrystallization kinetics in IF steel by electron backscatter diffraction

Mapping stress heterogeneity in single-crystal superalloys by novel submicron-resolved X-ray diffraction