Abstract:Synergic evolution of microstructure-texture-stored energy in interstitial-free (IF) steels has been investigated to elaborate the effect of dissolved rare-earth (RE) elements on static recrystallization. Grain size, texture fraction and geometrically necessary dislocation distribution of IF steel samples annealed for different times were compared, suggesting that RE elements could postpone recrystallization nucleation but accelerate grain coarsening. The visco-plastic self-consistent model was primarily adopted and verified, then used to calculate the relative activities of different slip systems. It was proved that the compatible deformation of IF steels was very sensitive to dissolved RE elements, in particular the {110} 6 2 slip systems became extremely inactive, leading to an α -fibre textures rich configuration of RE-IF steels. Although both IF steels have the same stored energy sequence of which γ -fibre takes precedence in nucleation followed by α -fibre, the nucleation rates of α / γ -fibres driven by the reduced stored energy slowed down in RE-IF steels. Further nucleation-path analyses revealed that shear bands within γ -fibre mainly sacrificed for grain nucleation of {111} orientation, while α -fibre especially prior grain boundaries therein preferred supplying nucleation sites for {554} grains, which accounting for the competitive growth of γ -fibre textures in RE-IF steels rather than being dominated by a single orientation. After grain growth, the major texture of Normal-IF steels had been transferred to {554} from {111} , while {554} in RE-IF steels still inherited the orientation advantage and grew up rapidly, thus inducing the grain coarsening. As this work offers a significant understanding of RE microalloying effect on static recrystallization, it will provide references for alloy design and industrial application of IF steels.

Recrystallization phenomena in an IF steel observed by in situ EBSD experiments

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Recrystallization of ferrite–austenite stainless steel

Adaptive characterization of recrystallization kinetics in IF steel by electron backscatter diffraction

Annealing behaviour and mechanical properties of severely deformed interstitial free steel

Influence of deformation temperature on recrystallization in a Ni-based single crystal superalloy

Microstructure and Hardness Evolution During Isothermal Process at 700 °C for Fe–24Mn–0.7Si–1.0Al TWIP Steel

Synergic Evolution of Microstructure-Texture-Stored Energy in Rare-Earth-Added Interstitial-Free Steels Undergoing Static Recrystallization

Experimental Investigation on Recrystallization Mechanism of a Ni-base Single Crystal Superalloy

Characteristics of Recrystallization Texture Evolution in High Magnetic Field for Interstitial Free (IF) Steel Sheet

Grain Refinement and Texture Change in Interstitial Free Steels after Severe Rolling and Ultra-Short Annealing

Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation: an in situ diffraction study

Revealing the inhomogeneous nature of microstructure and texture evolution in the cold-rolled CoCrFeMnNi alloy during static recrystallization

Tracing the recrystallization of warm temper-rolled Fe–6.5 wt% Si non-oriented electrical steel using a quasi in situ EBSD technique

The effect of deformation temperature on recrystallization in a Ni-based single crystal superalloys

Recrystallization Law of Ti-IF Steel During Annealing Process

Microstructural Evolution of IF-steel During Cold Rolling

A microstructural investigation of adiabatic shear bands in an interstitial free steel

Role of δ-phase on recrystallisation behaviour of Inconel 718

Heterogeneous local plastic deformation of interstitial free steel revealed using in-situ tensile testing and high angular resolution electron backscatter diffraction