Abstract:How to realize the synergistic optimization of electrical–thermal–mechanical properties of thermoelectric materials is a key challenge. Using the Bi0.5Sb1.5Te3 nanoparticle as a mixed agent provides an effective way to address this challenge. Here, Bi0.5Sb1.5Te3/In0.25Co4Sb12 nanocomposites with different contents of Bi0.5Sb1.5Te3 nanoparticles were successfully prepared by ultrasonic dispersion combined with spark plasma sintering. Phase and microstructure characterization presented that Te nanoparticles were precipitated from Bi0.5Sb1.5Te3 during the SPS sintering process. Transport measurement results showed that the electrical conductivity was increased due to the increased carrier concentration induced by the charge transfer between Te nanoparticles and the matrix. The Seebeck coefficient was also increased due to the selected electron scattering and increased scattering factor. The lattice thermal conductivity was dramatically suppressed because of the enhanced phonon scattering induced by the Bi0.5Sb1.5Te3 nanoparticles and in situ-precipitated Te nanoparticles and increased dislocations. As a result, a higher average ZT value of 1 was obtained in the range of 300–700 K by the decoupling of the electrical and thermal transport properties for the nanocomposite with 0.1 wt % of Bi0.5Sb1.5Te3 nanometer suspension. Furthermore, the flexural strength, fracture toughness, and hardness of the nanocomposites were also improved significantly. This work demonstrates that using the Bi0.5Sb1.5Te3 nanoparticle as a mixed agent can realize the synergistic optimization of electrical–thermal–mechanical properties of the In-filled CoSb3 thermoelectric material.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03351?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03351</a>.Detailed methods and characterization; schematic diagram of the test for flexural strength and fracture toughness; FESEM images of BST02 and BST03 samples; interface band bending away from the interface induced by the charge transfer; electric and thermal transport properties and ZT values of nanocomposites as a function of BST content at 300, 650, and 800 K; hardness of nanocomposites as a function of BST content at 300 K; and electrical transport properties and scattering factors of nanocomposites at room temperature (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03351/suppl_file/am1c03351_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Thermoelectric Properties of P-Type Cosb3 Nanocomposites with Dispersed Cosb3 Nanoparticles

Improved Thermoelectric Figure of Merit in N-Type CoSb3 Based Nanocomposites

Effects of Co:Sb Molar Ratio on Synthesis and Properties of Undoped Cosb3 Prepared Via A Polyol Method

Thermoelectric Properties of N-Type CoSb3 Nanocomposite Prepared by in Situ Solvothermal Synthesis and Hot Pressing

Enhanced Thermoelectric Properties of P-Type CoSb3/graphene Nanocomposite

Thermoelectric Properties of Yb0.15Co4Sb12based Nanocomposites with CoSb3nano-inclusion

Thermoelectric Properties of CoSb<sub>3</sub> Nanoparticle Films

(Bi,sb)2te3/sic Nanocomposites with Enhanced Thermoelectric Performance: Effect of SiC Nanoparticle Size and Compositional Modulation

PbTe-based Thermoelectric Nanocomposites with Reduced Thermal Conductivity by SiC Nanodispersion

Thermoelectric Properties of TiS2-xPbSnS3 Nanocomposites

Enhanced Thermoelectric Properties of Nano-Sic Dispersed NaCo2O4 Composites

Enhanced performance of thermoelectric nanocomposites based on Cu12Sb4S13 tetrahedrite

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Synergistic Optimization of Electrical–Thermal–Mechanical Properties of the In-Filled CoSb 3 Material by Introducing Bi 0.5 Sb 1.5 Te 3 Nanoparticles

BiSbTe-based nanocomposites with high ZT: The effect of SiC nanodispersion on thermoelectric properties

Thermoelectric and Mechanical Properties of ZnSb/SiC Nanocomposites

Lead-free AgSn4SbTe6 Nanocomposites with Enhanced Thermoelectric Properties by SiC Nanodispersion

Enhanced Thermoelectric Performance of Β-Zn4sb3 Based Composites Incorporated with Large Proportion of Nanophase Cu3SbSe4

Enhanced thermoelectric properties of binary CoSb3 by embedding FeCl3-intercalated graphene nanosheets

Thermoelectric and Mechanical Properties of Nano BaTiO<sub>3</sub> Composited Cu<sub>1.8</sub>S Bulks

Effect of Uniform Dispersion of Single-Wall Carbon Nanotubes on the Thermoelectric Properties of BiSbTe-Based Nanocomposites