Enhanced thermoelectric properties of binary CoSb3 by embedding FeCl3-intercalated graphene nanosheets

Peng-an Zong,Zhengdong Mao,Yixiang Ou,Taifeng Shi,Zhiweng Wang,Qihao Zhang,Peng Zhang,Chunlei Wan

DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.06.016

IF: 5.7

2021-10-01

Journal of the European Ceramic Society

Abstract:Filling the icosahedral lattice holes of the cage-compound CoSb3 with alkali, alkaline-earth and rare-earth metal atoms can endow CoSb3 with the transport characteristic of "phonon-glass-electron-crystal". However, the filler atoms greatly increase the cost in raw material as well as fabrication complexity. In this work, we embedded FeCl3-intercalated graphene nanolayers into polycrystalline CoSb3 by a solution-dispersion method combined with spark plasma sintering technology. The graphene nanosheets were mainly distributed in grain boundaries. Due to the increased carrier concentration and mobility, the electrical conductivity was improved. Meanwhile, due to the enhanced interfacial phonon scattering, the lattice thermal conductivity was effectively suppressed. The thermoelectric figure of merit of the nanocomposite reached 0.6 at a mass content of 0.2 % FeCl3-intercalated graphene nanolayers, outperforming all reported values of binary CoSb3 based nanocomposites, and even comparable to that of commercially used filled p-type Fe3CoSb12. This work provides a promising strategy for low-cost fabrication of p-type skutterudites.

materials science, ceramics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: How to significantly improve the thermoelectric performance of the binary CoSb₃ compound by introducing FeCl₃ - intercalated graphene nanosheets (GFeCl₃) without using filled atoms. Specifically, the author hopes to achieve this goal through the following ways:

1. **Improve electrical conductivity**: Improve electrical conductivity by increasing carrier concentration and mobility.
2. **Reduce lattice thermal conductivity**: Effectively suppress lattice thermal conductivity by enhancing interface phonon scattering.

### Specific problem description

Binary CoSb₃ is a typical Skutterudite, with the "phonon - glass - electron - crystal" (PGEC) property, that is, its electrical transport properties are similar to those of a crystal, while its thermal conductivity is similar to that of glass. However, although the traditional method of filling atoms can improve thermoelectric performance, it has disadvantages such as high cost and complex preparation. Therefore, researchers hope to find a low - cost and simple method to improve the thermoelectric performance of CoSb₃.

### Solution

The author proposes a new strategy, that is, embedding FeCl₃ - intercalated graphene nanosheets into polycrystalline CoSb₃ by solution dispersion method combined with spark plasma sintering technology (SPS). The main advantages of this method include:

- **Improve electrical conductivity**: Graphene nanosheets are mainly distributed at the grain boundaries, increasing carrier concentration and mobility, thereby improving electrical conductivity.
- **Reduce lattice thermal conductivity**: Due to the enhanced interface phonon scattering, lattice thermal conductivity is effectively suppressed.

### Experimental results

The experimental results show that the thermoelectric figure of merit (zT) of the composite containing 0.2 wt% FeCl₃ - intercalated graphene nanosheets reaches about 0.6 at 650 K, which is 450% higher than that of pure binary CoSb₃, and is even comparable to that of commercial rare - earth - element - filled p - type Fe₃CoSb₁₂.

### Conclusion

This research provides a promising way to improve the thermoelectric performance of binary CoSb₃ without using filled atoms. Since FeCl₃ - intercalated graphene nanosheets can be synthesized from easily available raw materials, this method is expected to achieve large - scale production and cost reduction.

### Key formula

The thermoelectric figure of merit \( zT \) is defined as:
\[ zT=\frac{\sigma S^{2}}{\kappa_{\text{tot}}} \]
where:
- \( \sigma \) is electrical conductivity
- \( S \) is the Seebeck coefficient
- \( \kappa_{\text{tot}} \) is the total thermal conductivity (including electronic thermal conductivity \( \kappa_{\text{ele}} \) and lattice thermal conductivity \( \kappa_{\text{lat}} \))

These formulas are used to evaluate the thermoelectric performance of materials and guide optimization strategies.