Abstract:Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb-CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated.

Thermoelectric Properties of TiS2-xPbSnS3 Nanocomposites

Enhanced Thermoelectric Performance of Xmos2–tis2 Nanocomposites

Lead-free AgSn4SbTe6 Nanocomposites with Enhanced Thermoelectric Properties by SiC Nanodispersion

PbTe-based Thermoelectric Nanocomposites with Reduced Thermal Conductivity by SiC Nanodispersion

Magnetically Enhanced Thermoelectric Performance of Ti0.75NiSb+x Mol % Fe (x = 0-5) Nanocomposites.

Thermoelectric enhancement for n-type PbS via synergistic effect of Ti doping and Cu2S compositing

(Bi,sb)2te3/sic Nanocomposites with Enhanced Thermoelectric Performance: Effect of SiC Nanoparticle Size and Compositional Modulation

Thermoelectric Transport Properties of PbTe-based Composites Incorporated with Cu2Se Nano-Inclusions

Composite of carbon dots and TiNiSn thermoelectric materials: Initial investigation on the electrical and thermal transport properties

PbS–Pb–Cu x S Composites for Thermoelectric Application

Enhanced Thermoelectric Properties of p-Type Bi 0.48 Sb 1.52 Te 3 /Sb 2 Te 3 Composite

Achieving higher thermoelectric performance of n-type PbTe by adjusting band structure and enhanced phonons scattering

Enhanced thermoelectric and mechanical properties of Bi0.5Sb1.5Te3 alloy with dispersed yttrium oxide ceramic nanoparticles

Enhanced thermoelectric performance through carrier scattering at heterojunction potentials in BiSbTe based composites with Cu3SbSe4 nanoinclusions

Thermoelectric Properties P-Type Si-20 at % Ge by Addition of Tin Nanoparticles

Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles

Nanostructures Boost the Thermoelectric Performance of PbS

Enhanced thermoelectric performance of hot-press Bi-doped n-type polycrystalline PbS

Enhanced Thermoelectric Properties of N-Type Bi2te3-Based Nanocomposite Fabricated by Spark Plasma Sintering

Enhanced Thermoelectric Performance in SnSe Based Composites with PbTe Nanoinclusions

Synthesis and Thermoelectric Properties of Zn4Sb3/Bi0.5Sb1.5Te3 Bulk Nanocomposites