Abstract:In this paper, a wideband accurate dB-linear variable-gain amplifier (VGA) is presented, which consists of three cascading gain stages with dc-offset cancellation. Based on duplicate biasing and active load techniques, this VGA achieves merits such as simple and accurate continuous dB-linear gain control, gain robustness to process and supply voltage variation and constant bandwidth at different gain settings. The dB-linear gain control is realized based on exponential current steering. The exponential conversion can be based on bipolar transistors or MOS transistors in subthreshold region. Both ways are implemented in this design for comparison purpose. With temperature compensation circuit, this VGA is insensitive to temperature variation. All gain stages of the VGA share the same biasing, exponential V-I conversion and temperature compensation circuits to reduce design complexity. This proposed VGA is fabricated in 55-nm CMOS technology with a core area of 0.033 mm(2). The measurement results show the proposed VGA has a dB-linear gain-control range from -37dB to 14 dB with an error within 0.65 dB. The -3dB bandwidth of the VGA is 740 MHz and is nearly constant when the gain varies. The core VGA circuit consumes about 2.49 mW. The proposed design features wide bandwidth, small chip area, and low power consumption.

A High Bandwidth G(M)-Constant Rail-To-Rail Cmos Opamp for Low Voltage Vlsi Systems

A High Bandwidth G(M)-Constant Rail-To-Rail Cmos Opamp For Low Voltage Vlsi Systems

A Broadband Constant-Transconductance Rail-to-Rail CMOS Op-Amp for Low-Voltage VLSI Systems

High-Speed Operational Amplifier Based on 0.5 Μm CMOS Process

The Design of a Low-Voltage Rail-to-Rail CMOS Operational Amplifier

A 3.6V Rail-to-Rail Operational Amplifier with Constant G M

An Analysis and Implementation of Common Mode Feedback in High-Speed Fully Differential Op-Amp

High-speed and high-gain operational amplifier

A Constant Gm CMOS Op-Amp with Rail-to-Rail input/output stage

A high gain low offset amplifier with rail-to-rail inputs

A Low-Power CMOS Rail-to-Rail Input/Output Constant-Gm Operational Amplifier

Design And Test Of A Low-Voltage Rail-To-Rail Op-Amp With Constant Transconductance And Sr

Design of Differential Variable-Gain Transimpedance Amplifier in 0.18 Μm SiGe BiCMOS

A novel accurate dB-linear control circuit topology for variable gain amplifiers in BiCMOS technology

1-V Low-Power Programmable Rail-to-Rail Operational Amplifier with Improved Transconductance Feedback Technique.

A Wideband Db-Linear VGA with Temperature Compensation and Active Load

A Robust Rail-to-Rail CMOS Operational Amplifier

Supply-adaptive Rail-to-rail CMOS OPAMP

A high current efficiency rail-to-rail operational amplifier

A low power constant-Gm rail-to-rail operational transconductance amplifier by recycling current

A Low Power Current Recycling Constant-GM Rail-to-rail OTA