Abstract:A high-gain, low-offset, and low-power auto-zero operational amplifier with rail-to-rail input/output is proposed. Based on a time-interleaved charge pump high-voltage on-chip internal power supply, the PMOS differential pair input configuration will achieve a rail-to-rail input range with constant transconductance. Time-interleaved auto-zero continuously eliminates the input offset voltage of the operational amplifier in the time domain. An nA-level bias circuit to realize low power. The operational amplifier circuit is based on a 65 nm CMOS process. Under 1.2V power supply voltage and temperature 27 °C, the input offset voltage of the operational amplifier is 3.16 μV and the input offset current is less than 20 pA. The temperature drift coefficient of offset voltage is 0.005 μV/°C between −40 °C and 90 °C. The variation rate of input transconductance is only 5.6 % among the rail-to-rail input range. The equivalent DC gain is 106.4 dB, the unit gain bandwidth is 0.54 MHz, the phase margin is 76.5°, and the power consumption is about 0.19 mW. The layout area is 0.83 × 0.75 mm 2 .

A Robust Rail-to-Rail CMOS Operational Amplifier

The Design of a Low-Voltage Rail-to-Rail CMOS Operational Amplifier

High-Speed Operational Amplifier Based on 0.5 Μm CMOS Process

High-speed and high-gain operational amplifier

A 3.6V Rail-to-Rail Operational Amplifier with Constant G M

A Low-Power CMOS Rail-to-Rail Input/Output Constant-Gm Operational Amplifier

A Broadband Constant-Transconductance Rail-to-Rail CMOS Op-Amp for Low-Voltage VLSI Systems

Design of Class AB Micropower Operational Amplifier with Rail-to-Rail Output

Rail-to-rail input/output bulk driven class AB operational amplifier with improved composite transistors

A Three Stage, Fully Differential 128–157 GHz CMOS Amplifier with Wide Band Matching

A 2.5 Gb/s CMOS Low Noise Transimpedance Amplifier with Active Feedback

1-V Low-Power Programmable Rail-to-Rail Operational Amplifier with Improved Transconductance Feedback Technique.

A high current efficiency rail-to-rail operational amplifier

Design of Differential Variable-Gain Transimpedance Amplifier in 0.18 Μm SiGe BiCMOS

A 65 nm CMOS rail-to-rail auto-zero operational amplifier based on charge pump internal power supply

An Inductorless 5-GHz Differential Dual Regulated Cross-Cascode Transimpedance Amplifier using 40 nm CMOS

A High Bandwidth G(M)-Constant Rail-To-Rail Cmos Opamp For Low Voltage Vlsi Systems

Supply-adaptive Rail-to-rail CMOS OPAMP

A high gain low offset amplifier with rail-to-rail inputs

A 1v,156.7μw,65.9db Rail-to-Rail Operational Amplifier by Means of Negative Resistance Load and Replica-Amplifier Gain Enhancement