Abstract:An improved operational transconductance amplifier (OTA) is presented in this work. The fully differential OTA adopts the current recycling technique and complementary NMOS and PMOS input branches to enhance the total transconductance. Moreover, in order to achieve higher current efficiency, a data-driven biasing circuit was developed to dynamically adjust the power consumption of the amplifier. Two comparators were added to detect the voltage difference at the input nodes, and when the differential input is large enough to activate either comparator, extra biasing current is activated and poured into the amplifier to enhance its slew rate and gain-bandwidth product (GBW). The threshold voltage of the complementary recycling folded cascode (CRFC)-based comparator is configured to suppress overshoot. Complementary common-mode feedback (CMFB) topology with local CMFB structure is built to acquire high common-mode gain. The OTA was fabricated in SMIC 0.18-mu m CMOS technology. The experimental result based on a capacitive feedback loop shows that the data-driven operation improves the average slew rate of the amplifier from 10.2 V/mu s to 55.5 V/mu s while the power only increases by 150%. The OTA has good potential to satisfy the fast settling demands for capacitive sensing circuits.

A low power constant-Gm rail-to-rail operational transconductance amplifier by recycling current

A Low Power Current Recycling Constant-GM Rail-to-rail OTA

The Design of a Low-Voltage Rail-to-Rail CMOS Operational Amplifier

High-Speed Operational Amplifier Based on 0.5 Μm CMOS Process

High-speed and high-gain operational amplifier

A 3.6V Rail-to-Rail Operational Amplifier with Constant G M

1-V Low-Power Programmable Rail-to-Rail Operational Amplifier with Improved Transconductance Feedback Technique.

A Low-Power CMOS Rail-to-Rail Input/Output Constant-Gm Operational Amplifier

Compact 50-62 GHz Current-Reused Low-Noise Amplifier with Gate-Drain Transformer Feedback

A high current efficiency rail-to-rail operational amplifier

Transconductance enhancement method for operational transconductance amplifiers

Design of Differential Variable-Gain Transimpedance Amplifier in 0.18 Μm SiGe BiCMOS

A New Low Power Symmetric Folded Cascode Amplifier by Recycling Current in 65nm CMOS Technology.

A Complementary Recycling Operational Transconductance Amplifier with Data-Driven Enhancement of Transconductance

A Constant Gm CMOS Op-Amp with Rail-to-Rail input/output stage

A high gain low offset amplifier with rail-to-rail inputs

A High Bandwidth G(M)-Constant Rail-To-Rail Cmos Opamp for Low Voltage Vlsi Systems

A Low Power and Low 1/f Noise Chopper-Stabilized Amplifier with Current Recycling Technology

0.5 V, Low-Power Bulk-Driven Current Differencing Transconductance Amplifier

Design And Test Of A Low-Voltage Rail-To-Rail Op-Amp With Constant Transconductance And Sr