Abstract:A LDO with an impedance-attenuated buffer was proposed to reduce power consumption and enhance stability with no off-chip capacitor.The LDO main loop adopted three-stage amplifier structure.Dynamically-biased shut feedback structure and slew rate enhancement circuit were used as an intermediate buffer for driving the pass device.The dominant pole was put on the output of the first-stage and the non-dominant poles were put on the output of the buffer and the output of the pass device by using the method of nested Miller compensation (NMC),realizing pole-pole tracking frequency compensation.The properties of stability and transient responses meet the design requirements.The proposed LDO was designed and implemented by using GSMC 130 nm CMOS process.The measured results showed that the output voltage was stable at 1.5 V when its input voltage was set to be changed from 1.6 to 4 V.The quiescent current was measured to be less than 881 nA at 1.5 mA output current.The designed circuit was validated by the results of the chip test.

An Inverter-based On-chip Voltage Reference Generator for Low Power Application

A Sub-1-V Nanopower MOS-Only Voltage Reference

A Low-Power Voltage Reference Source for Lithium Battery Protection ICs

An Ultra-low-power Gain-boost Class-C Inverter and Its Application

1 V 10 GHz CMOS frequency divider with low power consumption

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

A 1V Supply, 81nW, 800mv Bandgap Reference Voltage Circuit for Low Power Devices

A New On-Chip DC-DC Voltage Down Converter for Low-Power VLSI Chip

A Ultra Low Power Dissipation CMOS Bandgap Reference

A sub-1 V 115nA 0.35μm CMOS voltage reference for ultra low-power applications

A 0.8V Supply, 4nw, 621mv Bandgap Voltage Reference Circuits for Ultra-low Power IoT Systems

A 1V Ultra-Low Power High Precision CMOS Voltage Reference

Programme Design of Reference Voltage Source Module Embedded in LCOS Chip

A Subthreshold MOSFET Bandgap Reference with Ultra-Low Power Supply Voltage

Design of Area-Efficient GHz Range Current Mode Frequency Synthesizer Using Standard CMOS Technology

Low-dropout regulator with no off-chip capacitor and ultra low power consumption

A 5.5nw Voltage Reference Circuit

CMOS voltage reference based on weighted ΔVGS

An Ultra-Low Power 14.6ppm/°c 1.2V Bandgap Voltage Reference with Low Leakage Sample-and-Hold Switch

A 187-pW 51-ppm/°C Self-Adjusting Voltage Reference Circuit

A 30na Temperature-Independent CMOS Current Reference and Its Application in an LDO