Abstract:For the battery- or USB-powered portable smart devices, which supply their computing cores with a wide-range sub-volt rail, the energy-efficient high and wide voltage-conversion-ratio (VCR) converters are crucially important. In addition, low form factor and decent transient responses are also favorable for such applications. Prior state-of-the-art designs either use single-stage hybrid designs using multi-level or Dickson converters [1 – 3], or adopt two-stage cascaded architectures with a highly efficient unregulated front (or rear) stage [4], as shown in Fig. 18.6.1 (left). The multi-level designs, which conduct the full inductor current through all the on-state switches, are suited to low-to-medium power levels with limited current density. The Dickson converters take advantage of a high conversion ratio, however, at the cost of reduced output voltage range. The two-stage designs which show decent output range and efficiency, however, can suffer from heavy load efficiency degradation considering that the efficiency of both stages degrade with increasing load and the overall efficiency which is the product of the efficiencies of the two stages is severely degraded. Inspired by the inductive-sigma converter [5] which shunts a highly efficient unregulated LLC with a regulated Buck, this work proposes a reconfigurable capacitive-sigma converter. By input-series and output-shunting a highly efficient unregulated switched-capacitor (SC) converter with a reconfigurable Dickson hybrid Buck stage, the power stage input current is reused and output currents are combined. Therefore, the overall efficiency is greatly improved in a wide continuous VCR range and with an enhanced loading capacity. Besides, as will be demonstrated, the proposed design shows inherently decent load transient and regulation performances.

A New On-Chip DC-DC Voltage Down Converter for Low-Power VLSI Chip

On-Chip Voltage Down Converter Based on Moderate Inversion for Low- Power VLSI Chips.

Low Dropout Linear Regulator with No Off-Chip Capacitor and Low Power Consumption

A Low-Power, High-Stability and Capacitor-Free LDO

Fully Integrated High-Voltage Level Shifts and Drivers for Buck Converters.

Novel Through-Silicon-Via Inductor-Based On-Chip DC-DC Converter Designs in 3D ICs

A Novel Soft-Switching and Low-Conduction-loss Bidirectional DC-DC Converter

A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.

A Low-Power Voltage Reference Source for Lithium Battery Protection ICs

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

A High Performance 5-3V DC-DC Convertor

An Inverter-based On-chip Voltage Reference Generator for Low Power Application

A 5V Input 98.4% Peak Efficiency Reconfigurable Capacitive-Sigma Converter with Greater Than 90% Peak Efficiency for the Entire 0.4~1.2V Output Range.

A Novel Low-power Low-voltage Reference

An Ultrahigh Step-Down DC-DC Converter Based on Switched-Capacitor and Coupled Inductor Techniques

High efficiency, inductorless step-down DC/DC converter

Design of a Monolithic Low Voltage High Efficiency Boost DC-DC Converter ASIC Based on 0.5/spl Mu/m CMOS Process

A Low-Voltage All-Metal Oxide Semiconductor Voltage Reference with Ultra-Low Power

Improved On-Chip Components for Integrated DC-DC Converters in 0.13 &#x00b5;m CMOS

The Design Of A Start-Up Circuit For Boost Dc-Dc Converter With Low Supply Voltage

A High Precision Two Stage High Supply Voltage Regulate Circuit with Ultra-Low Standby Current