Abstract:This work deals with the effect of rare earth elements (RE) on the laser surface clad coatings. The friction and wear properties of these laser clad coatings were investigated. Laser cladding nickel-based alloy coatings containing various content of rare earth elements were prepared. The microstructure of the clad coatings were observed by scanning electron microscopy (SEM). A microhardness tester was used to measure the microhardness. The crystallographic phase of the clad coatings was determined by an x-ray diffractometer. The friction and wear behavior of the coatings were examined with a block-on-ring friction and wear tester. Then the worn surface of various coatings were analyzed through SEM. The experimental results showed that the addition of RE can refine the microstructure, increase the microhardness and change the crystallographic phase. As a result by RE the friction coefficient of the coatings was decreased and the wear resistance of the coatings was improved. The worn surface of the clad coatings containing RE was less severely destroyed than that without RE.This work deals with the effect of rare earth elements (RE) on the laser surface clad coatings. The friction and wear properties of these laser clad coatings were investigated. Laser cladding nickel-based alloy coatings containing various content of rare earth elements were prepared. The microstructure of the clad coatings were observed by scanning electron microscopy (SEM). A microhardness tester was used to measure the microhardness. The crystallographic phase of the clad coatings was determined by an x-ray diffractometer. The friction and wear behavior of the coatings were examined with a block-on-ring friction and wear tester. Then the worn surface of various coatings were analyzed through SEM. The experimental results showed that the addition of RE can refine the microstructure, increase the microhardness and change the crystallographic phase. As a result by RE the friction coefficient of the coatings was decreased and the wear resistance of the coatings was improved. The worn surface of the clad coa...

Effects of the Addition of Rare Earth on Properties of Paper-Based Friction Materials

Effects of Rare Earths on Properties and Microstructure of Automotive Friction Materials

Effect of Rare Earths on Mechanical and Tribological Properties of Carbon Fibers Reinforced PTFE Composite

Effects of Rare Earth Additions on Compound Structure and As-Annealed Properties of Cu-12%Ag

Effects of rare-earth oxides on the microstructure and properties of Fe-based friction materials synthesized by in situ carbothermic reaction from vanadium-bearing titanomagnetite concentrates

Effect of LNBR content on the properties of the carbon fiber reinforced paper-based friction materials

Influences of Resin Contents on Performance of Friction and Wear of Rare Earth Friction Materials

Effect of Al2O3 Content on the Friction and Wear Performance of Carbon Fiber Reinforced Paper-based Friction Materials

Laser Surface Clad Coatings Modified by Rare Earth

Effect of Reinforced Fiber on the Performance of Paper-based Friction Material

The Effect of Resin Content on the Properties of Wet Paper-based Friction Material

Study on the Friction and Wear Properties of Multiple Rare-Earth-Oxide-Reinforced Resin-Based Friction Materials

Influence of RE Addition on Ferro-Matrix Friction Material by in Situ Carbothermal Reduction from Vanadium-Bearing Titanomagnetite

Study on sliding friction and wear behavior of M50 bearing steel with rare earth addition

Effect of rare earth on microstructure and properties of the self-propagating spraying coating

Effect of Cr–Fe on friction and wear properties of Cu-based friction material

Preparation and Characterization of Semi-Metal Friction Materials Doping Rare Earths

Effect of Rare Earths on the Quality of Brush-Plated Coating

Effect of Phenolic Resin Content on Performance of Carbon Fiber Reinforced Paper-Based Friction Material

Effecfs of different Re additives on properties of W-Cu contact materials

Tribological properties of lanthanum treated carbon fibers reinforced PTFE composite under dry sliding condition