Abstract:The separation of methane (CH4) and nitrogen (N2) is a significant challenge to the enrichment and utilization of low concentration CH4 due to the similarity in the physical and chemical properties of the two molecules. In this work, we investigated the separation of CH4 from N2 using 100 kg of a new ionic liquidic zeolite (ILZ) material in a 6‐bed pilot‐scale pressure swing adsorption process. Feed gases with CH4 concentrations of 5.0% and 16.1% were upgraded to 11.5% and 34.6%, respectively, with CH4 recoveries higher than 80%. The pilot test results were used to anchor a numerical model that then allowed the efficient investigation of multiple operational parameters including desorption pressure and feed gas flow rates. The numerical model produced CH4 concentrations for both product streams consistent with those measured in the pilot experiments, with root mean square deviations below 2%. The modeling results revealed that sufficiently low desorption pressures can unexpectedly lead to lower heavy product purities under limited feed gas flow conditions. Furthermore, the optimum feed gas flow rate under which maximum heavy product purity is achieved increases with lower desorption pressure. The maximum CH4 concentrations increased from 31.8% to 41.5%, as desorption pressures decreased from 22.8 to 12.2 kPa for optimum feed flow rates between 78.2 and 105.5 mol/h. We also demonstrate a method of process optimization based on the bed capacity ratio, ℂ, which provides a scale‐independent measure of the degree to which the column is being used effectively. By varying feed flow rate and/or desorption pressure, ℂ values between 0.2 and 0.8 were explored, with maxima in the combined separation performance metric (methane recovery) × (methane purity) occurring for values of ℂ in the range 0.29–0.36. This separation performance optimization by adjusting ℂ provides an effective strategy for integrating and understanding the impact of multiple operating parameters.

Experimental and Numerical Analysis on the Enhanced Separation Performance of a Medical Oxygen Concentrator Through Two-Bed Rapid Pressure Swing Adsorption

Experimental study on oxygen concentrator with wide product flow rate range: individual parametric effect and process improvement strategy

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Medical oxygen concentrators: a review of progress in air separation technology

Evaluation of oxygen separation from air by pressure/vacuum swing adsorption

The Production of Industrial-Grade Oxygen from Air by Pressure Swing Adsorption

Plateau-Adapted Single-Pump, Single-Bed Vacuum Pressure Swing Adsorption Oxygen Generation Process Simulation and Optimization

Effectiveness of Bi-metallic LSX zeolites in O 2 purification: Examining the impact of extra-framework cations

Thermodynamic–Kinetic Synergistic Separation for O 2 /N 2 and CO 2 /CH 4 on Nanoporous Carbon Molecular Sieves

Experimental study of the effect of salinity and surfactant on mass transfer characteristics of oxygen micro-nano bubbles

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

CFD Simulation for Separation of Carbon Dioxide-Methane Mixture by Pressure Swing Adsorption

Preparation, Characterization, and Performance Evaluation of Polysulfone Hollow Fiber Membrane with PEBAX or PDMS Coating for Oxygen Enhancement Process

Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process

Chemical Looping Air Separation with Sr0.8Ca0.2Fe0.9Co0.1O3-δ Perovskite Sorbent: Packed Bed Modeling, Verification, and Optimization

Techno-economic analysis of carbon molecular sieve membranes to produce oxygen enrichment air

Separation of methane and nitrogen using ionic liquidic zeolites by pressure vacuum swing adsorption

Enrichment of Oxygen-Containing Low-Concentration Coalbed Methane with CMS-3KT as the Adsorbent

Dynamic process simulation and optimization of CO2 removal from confined space with pressure and temperature swing adsorption

Carbon monoxide isotope enrichment and separation by pressure swing adsorption

Machine learning and in-silico screening of metal–organic frameworks for O2/N2 dynamic adsorption and separation