Abstract:Fouling control strategies play a crucial role in membrane distillation (MD) process, primarily due to the significant limitation of fouling during the scaling-up process. The utilization of microbubbles (MBs) aeration has exhibited promising potential in mitigating membrane fouling when treating high salinity wastewater. Aeration can introduce gas-liquid two-phase flow on the membrane surface, thereby increasing the membrane surface shear force. The mechanism of aeration technology for controlling fouling includes the following points: introduction of gas-liquid two-phase flow; physical substitution of concentration polarization layer; pressure pulses caused by bubbles flowing through the membrane surface and increasement of the cross flow velocity. This research aims to optimizing the effect of air MBs with different concentrations and sizes introduced in the feed side on membrane fouling control, we creatively used the method of releasing pressure gradiently to achieve size regulation of MBs within a certain range for the first time, firstly regulated the generation of MBs by manipulating gas flow rate and release pressure. Under the optimal condition of 40 mL/min and 0.6 MPa, it will yield concentration of 1.58 × 10 4 /mL and D50 Sauter size of 64.69 μm MBs with pure water permeance flux of 12.32 kg/(m 2 ·h). It was observed that higher gas flow rates primarily increased MBs concentration, while lower pressures predominantly reduced MBs size through the method of inline imaging. Experimental results indicated that introduction of MBs can slightly improve the temperature polarization coefficient and mass transfer coefficient under different operating modes. Consequently, further investigations focused on the influence of MBs characteristics on different fouling control. All conditions reach 99 % rejection for inorganic salt and HA. This study provided empirical evidence that higher concentration and larger size of MBs intensify the gas-liquid two-phase flow disruption and exhibit a better shear effect on scaling phenomena, which yield advantageous outcomes in terms of augmenting permeance flux and water vapor production, with permeance flux increased from 40.12 % to 55.42 % for inorganic fouling and increased from 68.35 % to 80.15 % for inorganic and HA fouling. These results were confirmed via membrane surface using scanning electron microscopy and energy dispersive spectroscopy. In summary, this research aided in identifying appropriate operating conditions for mitigating inorganic and composite scaling by implementing air-infused MBs in direct contact membrane distillation (DCMD), which provides scientific and technical guidance for controlling fouling in MD in practical applications.

Experimental study of the effect of salinity and surfactant on mass transfer characteristics of oxygen micro-nano bubbles

Effect of Pore Size Distribution and Colloidal Fines of Porous Media on the Transport Behavior of Micro-Nano-bubbles

A Comparative Study of Removal Efficiency of Organic Contaminant in Landfill Leachate-Contaminated Groundwater under Micro-Nano-bubble and Common Bubble Aeration

Effect of Chemical Agents on the Diffusion Behavior of Oxygen in Groundwater Under Combined Remediation Technique of Air Sparging and Soil Flushing

Impact of Groundwater Salinity on Bioremediation Enhanced by Micro-Nano Bubbles

Characteristics of micro-nano bubbles and potential application in groundwater bioremediation.

Micro-Nano Bubbles Conditioning Treatment of Contaminated Sediment for Efficient Reduction: Dehydration Characteristic and Mechanism

Investigation of surfactant effect on ozone bubble motion and mass transfer characteristics

The Effect of Microbubbles on Gas-Liquid Mass Transfer Coefficient and Degradation Rate of Cod in Wastewater Treatment

Subsurface transport behavior of micro-nano bubbles and potential applications for groundwater remediation.

Effect of micro-nanobubbles with different gas sources on the growth and metabolism of chemoautotrophic microorganisms

Effects of Surfactants on Oxygen Transfer in Microbubble Aeration

Effects of Contaminants on Oxygen Transfer in Microbubble Aeration

An Experimental Investigation of Cavitation Bulk Nanobubbles Characteristics: Effects of pH and Surface-active Agents

Nanobubbles produced by nanopores to probe gas-liquid mass transfer characteristics

The effect of preparation time and aeration rate on the properties of bulk micro-nanobubble water using hydrodynamic cavitation

Treatment Of Organics Contaminated Wastewater By Ozone Micro-Nano-Bubbles

Characteristics of oxygen transfer in microbubble aeration

Micro and nano bubbles promoted biofilm formation with strengthen of COD and TN removal synchronously in a blackened and odorous water

The Effect of Inorganic Salt on Multiphase Flow Characteristics in a Microbubble Column: A Focus on the Ionic Strength

Optimizing fouling mitigation in membrane distillation by controlled microbubble size and concentration