Plateau-Adapted Single-Pump, Single-Bed Vacuum Pressure Swing Adsorption Oxygen Generation Process Simulation and Optimization

Yingying Zhang,Yanbin Li,Zhenxing Song,Hongyun Sun,Bolun Wen,Junming Su,Jun Ma,Yanjun Zhang
DOI: https://doi.org/10.3390/pr12051015
IF: 3.5
2024-05-17
Processes
Abstract:To enhance the oxygen guarantee capacity in high altitude areas and address the challenges of traditional pressure swing adsorption oxygen generation fixed equipment with large volume and multiple device modules, a novel single-reversible-pump single-bed vacuum pressure swing adsorption (VPSA) oxygen generation process was proposed and simulated. This study investigated the effects of purge on oxygen productivity, purity, recovery, and energy consumption, determining that the optimum ratio of total oxygen in the purge gas to the total oxygen in the feed gas (P/F) was 0.176. A set of principle prototypes was developed and validated in plains. The process performance was then simulated and studied at altitudes of 3000 m, 4000 m, and 5000 m. Finally, the optimization was carried out by adjusting the product flow rate and feed flow rate, revealing that the best performance can be achieved when the oxygen purity exceeded 90% with lower energy consumption or larger productivity than the optimization goal. This study serves as a valuable reference for the optimization of the VPSA oxygen generation process in a plateau environment.
engineering, chemical
What problem does this paper attempt to address?
### Problems the paper attempts to solve This paper aims to solve the problem of insufficient oxygen supply in high - altitude areas, especially the inconvenience in movement and difficulties in emergency rescue caused by the large volume and numerous modules of traditional multi - bed vacuum pressure swing adsorption (VPSA) oxygen - making equipment. To overcome these problems, a single - bed VPSA oxygen - making process based on a reversible pump was designed in the research, and LiLSX molecular sieve was used as the adsorbent material. By measuring the adsorption isotherm and establishing a mathematical model, the influence of purging on oxygen production, purity, recovery rate and unit oxygen energy consumption was studied, and the optimal purging ratio (P/F) was determined. Finally, by adjusting the product flow rate and the feed flow rate, the performance of the VPSA oxygen - making process in the high - altitude environment was optimized, and the adjustable and controllable oxygen production capacity of medium - sized oxygen - making equipment under different external environmental changes was achieved. ### Specific objectives 1. **Design a new single - bed VPSA oxygen - making process**: - Use a reversible pump to achieve single - bed operation and reduce equipment volume and complexity. - Adopt LiLSX molecular sieve as an adsorbent to improve the nitrogen - oxygen separation effect. 2. **Establish a mathematical model**: - Measure the adsorption isotherm and establish a mathematical model of the adsorption bed. - Simulate the performance of the VPSA process under different conditions, including oxygen purity, recovery rate, production and energy consumption. 3. **Optimize process parameters**: - Study the influence of purging on process performance and determine the optimal purging ratio (P/F). - Optimize the VPSA oxygen - making process in the high - altitude environment by adjusting the product flow rate and the feed flow rate. 4. **Verify the prototype device**: - Construct a principle prototype and verify its performance in the plain area. - Simulate and study the process performance at different altitudes (3,000 meters, 4,000 meters, 5,000 meters). ### Main contributions - Proposed a single - bed VPSA oxygen - making process suitable for the high - altitude environment, which improves the mobility and adaptability of the equipment. - Through numerical simulation and experimental verification, the process parameters were optimized to achieve high - purity (more than 90%) and low - energy - consumption oxygen production. - Provided valuable references for oxygen generation in high - altitude areas, which is helpful to improve emergency rescue and medical support capabilities.