Abstract:Applying bamboo in construction is expected to reduce carbon footprint and promote environmental protection. Very limited information is available in the literature about the shear behavior of glued laminated bamboo (glubam, i.e., a type of engineered bamboo) beams. To this end, this paper presents an experimental investigation of shear behavior for full-scale glubam beams using three-point loading test. Fourteen specimens were tested, considering the effect of shear span-depth ratio (a/d) and beam depth on the shear response of glubam beams. Digital Image Correlation (DIC) technique was conducted to measure the strain fields on two specimens with different shear span-depth ratios. The test results show that the glubam beams with a/d= 1.0 occurred local compressive damage at the loading region and the mixed local compression-flexure damage; and beams with a/ d= 2.0 exhibited flexure-dominated damage together with a minor local compressive settlement at the loading region. Specifically, increasing the shear span-depth ratio reduces the load capacity but improves the ductility and minimizes the global damage in the glubam beam. Larger shear area of the beam has a smaller shear stress, which demonstates the scale effect on the shear behavior of the glubam beam. DIC technique is feasible for monitoring the shear behavior of glubam beams with a small shear span-depth ratio. Meanwhile, this technique can also be employed for the beams with a relatively large shear span-depth ratio to monitor the shear behavior at a relatively small deformation.

Impact Bending Behaviors of Parallel Bamboo Strand Lumber Beams: Velocity Sensitivity and Anisotropy

First-order Anisotropic Beam Model and Failure Criterion for Flexural Parallel Bamboo Strand Lumbers

Bending Performance of Glubam Beams Made with Different Processes

Anisotropic Mechanical Properties and Composite Model of Parallel Bamboo Strand Lumbers

Impact Toughness and Quasi-Static Bending Strength of Glubam

Anisotropic Bilinear Flexural Behavior and Failure Mechanism of Parallel Bamboo Strand Lumber Plates

Low Velocity Flexural Impact Behaviors of Bamboo Fiber Reinforced Composite Beams

Flexural Performances and Failure Analyses of Parallel Bamboo Strand Lumber Plates

High-strain Rate Compressive Behavior of Douglas Fir and Glubam

Experimental investigation on shear behavior of full-scale glued laminated bamboo beams under three-point loading test and using digital image correlation technique

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

INVESTIGATION ON BENDING BEHAVIOR OF GLUBAM I-SHAPED JOIST

Flexural Fatigue Study of Glubam Beams

Experimental study on mechanical behavior of glue laminated bamboo Ⅰ-joists

Anisotropy Attenuation of Reconstituted Bamboo Lumber by Orthogonal Layup Process

Slenderness Ratio Effect on Eccentric Compression Properties of Parallel Bamboo Strand Lumber Columns

Size Design and Nonlinear Stress-Strain Relationship of Parallel Bamboo Strand Lumbers in Tension and Compression

Flexural Failure Mechanism of Bamboo Composite Plates with Different Construction Technologies and Tectonic Patterns

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

The Bending Properties of Bamboo Strand Board I-beams

Impact Performance of Two Bamboo-Based Laminated Composites