Abstract:This study attempts to develop a novel structural nail-laminated panel constructed of engineered bamboo and local fast-grown plantation Chinese fir. An experimental program is reported in this paper on static bending behaviors of such nail-laminated bamboo-timber (NLBT) panel. Twelve NLBT specimens, including five short span specimens without butt joints and seven long span specimens with different butt joints were manufactured and tested. The panel span, species of sawn timber boards, the cross sectional configuration, and reinforcement measures of butt joints were chosen as the experimental parameters in the current investigation. The typical failure mode of the short span NLBT panels exhibited a multiple-fracture process caused by the tension failure of timber layers, while the overall collapse was much delayed or avoided attributed to the residual bending capacity provided by glubam layers. Test results demonstrate that the use of fast-grown Chinese fir instead of imported dimension lumber to combine glubam does not obviously reduce the bending performance of NLBT panels. The proposed vertical nailing reinforcement for butt joints can significantly improve the bending stiffness of the long span NLBT panels, and it is convenient for processing and assembling of NLBT components. Based on the ratio of bamboo and timber, a simple linear relationship is proposed for predicting the elastic modulus of the NLBT through regression analysis. The observed performance evaluation also reveals that the bending performance of the proposed NLBT structural panels is sufficient to meet the design requirements for using as the structural floors in offices and residential buildings. This research provides a feasible and reasonable approach for developing local fast-grown species as structural components.

Size Design and Nonlinear Stress-Strain Relationship of Parallel Bamboo Strand Lumbers in Tension and Compression

Slenderness Ratio Effect on Eccentric Compression Properties of Parallel Bamboo Strand Lumber Columns

Axial Compression Behaviour of Bamboo-Wood Composite Columns Fabricated with Glubam and Laminated Veneer Lumber

Anisotropic Mechanical Properties and Composite Model of Parallel Bamboo Strand Lumbers

Experimental study on mechanical behavior of glue laminated bamboo Ⅰ-joists

EXPERIMENTAL STUDIES OF GLUBAM COLUMNS UNDER AXIAL LOADS

Experimental investigation on shear behavior of full-scale glued laminated bamboo beams under three-point loading test and using digital image correlation technique

Bending Performance of Nail-Laminated Bamboo-Timber Panels Made with Glubam and Fast-Grown Plantation Chinese Fir

Experimental Studies on Glubam Columns under Axial Compression

Flexural Fatigue Study of Glubam Beams

Bending Performance of Glubam Beams Made with Different Processes

First-order Anisotropic Beam Model and Failure Criterion for Flexural Parallel Bamboo Strand Lumbers

Experimental Studies of Light-Weight Woodframe Shear Walls with Ply-Bamboo Sheathing Panels

Flexural Performances and Failure Analyses of Parallel Bamboo Strand Lumber Plates

Anisotropic Bilinear Flexural Behavior and Failure Mechanism of Parallel Bamboo Strand Lumber Plates

Impact Bending Behaviors of Parallel Bamboo Strand Lumber Beams: Velocity Sensitivity and Anisotropy

Nonlinear modeling of bamboo fiber reinforced composite materials

Behavior and strength of rectangular bamboo scrimber columns with shape and slenderness effects

Local buckling resistance of bamboo scrimber plates in compression

Influence of slenderness ratio and sectional geometry on the axial compression behavior of original bamboo columns

Effect of crack size, thickness and span on the transverse mode I fracture characteristics of laminated flattened-bamboo lumber