Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

First-order Anisotropic Beam Model and Failure Criterion for Flexural Parallel Bamboo Strand Lumbers

Anisotropic Mechanical Properties and Composite Model of Parallel Bamboo Strand Lumbers

Anisotropic Bilinear Flexural Behavior and Failure Mechanism of Parallel Bamboo Strand Lumber Plates

Flexural Performances and Failure Analyses of Parallel Bamboo Strand Lumber Plates

Impact Bending Behaviors of Parallel Bamboo Strand Lumber Beams: Velocity Sensitivity and Anisotropy

Flexural behavior of FRP reinforced glubam beams

Flexural Fatigue Study of Glubam Beams

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

Bending Performance of Glubam Beams Made with Different Processes

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Experimental investigation on shear behavior of full-scale glued laminated bamboo beams under three-point loading test and using digital image correlation technique

Failure Analysis of Typical Glubam with Bidirectional Fibers by Off-Axis Tension Tests

Slenderness Ratio Effect on Eccentric Compression Properties of Parallel Bamboo Strand Lumber Columns

Flexural Failure Mechanism of Bamboo Composite Plates with Different Construction Technologies and Tectonic Patterns

Anisotropy Attenuation of Reconstituted Bamboo Lumber by Orthogonal Layup Process

Size Design and Nonlinear Stress-Strain Relationship of Parallel Bamboo Strand Lumbers in Tension and Compression

Flexural Behavior of Hybrid Composite Beams with a Bamboo Layer and Lattice Ribs

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Real-time flexural fracture behaviors and toughening mechanisms of bamboo slivers with different fiber content and moisture content

Comparative investigation on beam-to-beam connection with different types of connecting plates

Study on flexural behaviour of a novel wood composite beam