Abstract:Cracking in fibrous composites is inevitable, and the fracture pattern is influenced by its fiber distribution. Bamboo fibrous composites have a distinct fiber distribution, which makes them an excellent material for studng the relationship between fiber distribution and fracture mode. Glued laminated bamboo is a bi-directional bamboo fibrous composite, which is called glubam for short. Its vertical thickness is about 28 mm, and the ratio of the number of longitudinal fiber layers to the number of transverse fiber layers is 4:1. This study conducted three-point bending fracture tests on single-edge notched specimens of glubam to investigate its mode-I fracture characteristics in the transverse vertical direction. The deformation curves show that the specimens still have the load-carrying capacity after reaching the maximum load, and the load shows a trend of step-like decrease, exhibiting a quasi-ductile fracture behavior. Overall, the fracture process can be divided into four stages, including linear, softening, quasi-ductile, and failure stages. In this study, based on certain assumptions, the prefabricated notch length a0 was adjusted according to the position of the transverse fibers. Subsequently, the non-linear elastic fracture mechanics method was employed to calculate the fracture parameters of glubam during the softening and quasi-ductile stages, including the fracture toughness KIC* and fiber tensile strength ft. The deviation of the fracture parameters between the two stages is within 10%, indicating that the correction of the a0 is correct. This indirectly proves that the staggered structure formed by longitudinal and transverse fibers is responsible for the quasi-toughness fracture of glubam. Finally, this study summarized and analyzed the quasi-ductile fracture behavior and found that materials or structures exhibiting quasi-ductile fracture behavior often possess a staggered structure. This staggered structure makes the crack in the form of semi-stable propagation, while the load decreases in a step-like manner.

Flexural Failure Mechanism of Bamboo Composite Plates with Different Construction Technologies and Tectonic Patterns

Flexural Performances and Failure Analyses of Parallel Bamboo Strand Lumber Plates

Anisotropic Bilinear Flexural Behavior and Failure Mechanism of Parallel Bamboo Strand Lumber Plates

Flexural Fatigue Study of Glubam Beams

Axial Compression Behaviour of Bamboo-Wood Composite Columns Fabricated with Glubam and Laminated Veneer Lumber

Flexural behavior of FRP reinforced glubam beams

Mechanical Behavior of Glued Laminated Bamboo Moment-Resisting Connections

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

A more explosion-resistant bamboo fiber reinforced composite structure through balancing bamboo anisotropy

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Experimental study on creep and loading property of laminated bamboo bridge

Flexural Behavior of Hybrid Composite Beams with a Bamboo Layer and Lattice Ribs

Anisotropy Attenuation of Reconstituted Bamboo Lumber by Orthogonal Layup Process

Study on the Quasi-Ductile Fracture Behavior of Glubam: The Role of Fiber Distribution

First-order Anisotropic Beam Model and Failure Criterion for Flexural Parallel Bamboo Strand Lumbers

Real-time flexural fracture behaviors and toughening mechanisms of bamboo slivers with different fiber content and moisture content

Laminated bamboo materials for plated building structures

Close-in Explosion Performances and Damage Evaluation of Bamboo Fiber Reinforced Laminates

Anisotropic Mechanical Properties and Composite Model of Parallel Bamboo Strand Lumbers

Impact Performance of Two Bamboo-Based Laminated Composites

Flexural Behaviors of CFRP Strengthened Laminated Bamboo Arches