Abstract:Cracking in fibrous composites is inevitable, and the fracture pattern is influenced by its fiber distribution. Bamboo fibrous composites have a distinct fiber distribution, which makes them an excellent material for studng the relationship between fiber distribution and fracture mode. Glued laminated bamboo is a bi-directional bamboo fibrous composite, which is called glubam for short. Its vertical thickness is about 28 mm, and the ratio of the number of longitudinal fiber layers to the number of transverse fiber layers is 4:1. This study conducted three-point bending fracture tests on single-edge notched specimens of glubam to investigate its mode-I fracture characteristics in the transverse vertical direction. The deformation curves show that the specimens still have the load-carrying capacity after reaching the maximum load, and the load shows a trend of step-like decrease, exhibiting a quasi-ductile fracture behavior. Overall, the fracture process can be divided into four stages, including linear, softening, quasi-ductile, and failure stages. In this study, based on certain assumptions, the prefabricated notch length a0 was adjusted according to the position of the transverse fibers. Subsequently, the non-linear elastic fracture mechanics method was employed to calculate the fracture parameters of glubam during the softening and quasi-ductile stages, including the fracture toughness KIC* and fiber tensile strength ft. The deviation of the fracture parameters between the two stages is within 10%, indicating that the correction of the a0 is correct. This indirectly proves that the staggered structure formed by longitudinal and transverse fibers is responsible for the quasi-toughness fracture of glubam. Finally, this study summarized and analyzed the quasi-ductile fracture behavior and found that materials or structures exhibiting quasi-ductile fracture behavior often possess a staggered structure. This staggered structure makes the crack in the form of semi-stable propagation, while the load decreases in a step-like manner.

What problem does this paper attempt to address?

This paper primarily investigates the quasi-ductile fracture behavior of bamboo composite material (Glubam) in the shear direction, especially the influence of fiber distribution on its fracture pattern. Glubam is a bidirectional bamboo composite material composed of longitudinal and transverse fiber layers, exhibiting good mechanical properties. The study analyzes the type I fracture characteristics of Glubam's single-edge notched specimen in the TV direction through three-point bending fracture tests. The experimental results show that Glubam still has load-bearing capacity after reaching its maximum load, exhibiting a step-like load decrease and demonstrating quasi-ductile fracture behavior. The fracture process can be divided into four stages: linear stage, softening stage, quasi-ductile stage, and failure stage. The study uses nonlinear elastic fracture mechanics method to calculate fracture parameters in the softening and quasi-ductile stages, including fracture toughness KIC* and fiber tensile strength ft, and finds that the deviation of these parameters in the two stages is within 10%, confirming the importance of fiber distribution for the quasi-ductile fracture of Glubam. The study also summarizes that quasi-ductile fracture behavior is usually associated with an interlaced structure, which allows crack propagation in a semi-stable manner and exhibits step-like load decrease. The conclusion points out that the quasi-ductile fracture behavior of Glubam may be attributed to the structure formed by the interlacing of longitudinal and transverse fibers inside. In the paper, the authors conducted experiments on different numbers of transverse fiber layers and observed that as the number of transverse fiber layers increases, the quasi-ductile fracture characteristics of the material become more apparent. This finding is significant for understanding and improving the engineering application of bamboo composite materials, particularly in structural design and durability assessment.

Study on the Quasi-Ductile Fracture Behavior of Glubam: The Role of Fiber Distribution

Failure Analysis of Typical Glubam with Bidirectional Fibers by Off-Axis Tension Tests

Impact Toughness and Quasi-Static Bending Strength of Glubam

An Experimental Study on Shear Strength of Glubam

Mechanical Properties of Aged Glue Laminated Bamboo for Structural Members

Mechanical Behavior of Glued-in GFRP Rod in Glubam: Experimental and Analytical Study

Flexural Fatigue Study of Glubam Beams

Experimental Studies on Bolted Glubam Connections

Mechanical Behavior of Glued Laminated Bamboo Moment-Resisting Connections

Bending Performance of Glubam Beams Made with Different Processes

Pull-Out Behavior of CFRP Bars in Glued-In Glubam Joints

Experimental investigation on shear behavior of full-scale glued laminated bamboo beams under three-point loading test and using digital image correlation technique

Experimental Studies on Roof Trusses Made of Glubam

Glue Laminated Bamboo (GluBam) for Structural Applications

Flexural behavior of FRP reinforced glubam beams

Structural behavior of glubam I-joists

Axially Loaded Single Threaded Rod Glued in Glubam Joint

INVESTIGATION ON BENDING BEHAVIOR OF GLUBAM I-SHAPED JOIST

The Off-Axis Embedment Performance of Bamboo Panels Used for Glubam Structures

Mechanical Properties of Engineered Bamboo Boards for Glubam Structures

Production, Environmental Impact and Mechanical Properties of Glubam